Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-27T02:18:05.118Z Has data issue: false hasContentIssue false
  • English
  • Français

Mesophase ordering and structuring of porous titanium dioxide with high surface area and strong light harvesting matrix for dye-sensitized solar cell

Published online by Cambridge University Press:  18 August 2011

Ghim W. Ho ,
Shweta Agarwala  and
Moe Kevin
Ghim W. Ho
Affiliation:
Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576.
Shweta Agarwala
Affiliation:
Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576.
Moe Kevin
Affiliation:
Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576.
Get access

Abstract

Dye sensitized solar cells (DSSC) are attractive because they hold promise for devices that are easy to fabricate and inexpensive. In the present work, highly crystalline mesoporous TiO2 has been synthesized by evaporation induced self assembly (EISA) method using triblock copolymer Pluronic P123 as the organic template. The synthesized TiO2 is anatase in nature with a pore size of 10-15 nm. DSSC made from mesoporous TiO2 demonstrated solar conversion efficiency of ∼7%. This comes from the benefits of increased surface roughness, surface area and uniform porosity. In addition, well ordered and crystalline pores provided good sunlight absorption and low recombination path for charge carriers. To further enhance the efficiency of the DSSCs, light scattering centers were introduced in the mesoporous TiO2 film. Nanoparticles light scatterers are introduced to scatter the incoming light and hence to increase the light harvesting capability of the device. A 26 % increase in DSSC efficiency was observed with the implementation of scattering centers.

Keywords

electronic materialoxidenanostructure
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1322: Symposium B – Third-Generation and Emerging Solar-Cell Technologies , 2011 , mrss11-1322-b10-10
Copyright
Copyright © Materials Research Society 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. O’Regan, B.; Grätzel, M. Nature 1991, 353, 737–740.Google Scholar
2. Law, M.; Greene, L. E.; Johnson, J. C.; Saykally, R.; Yang, P. Nature Materials 2005, 4, 455–459 Google Scholar
3. Wei, M.; Konishi, Y.; Zhou, H.; Yanagida, M.; Sugihara, H.; Arakawa, H. J Mater. Chem. 2006, 16, 1287–1293.Google Scholar
4. Kambe, S.; Murakoshi, K.; Kitamura, T.; Wada, Y.; Yanagida, S.; Kominami, H.; Kera, Y. Solar Energy Mater. Solar Cells 2000, 6, 427–441.Google Scholar
5. Kajihara, K.; Yao, T. J. Sol-gel Sci. Tech. 2000, 17, 173–184.Google Scholar
6. Agarwala, S.; Ho, G. W. Mater. Lett. 2009, 6, 1624–1627.Google Scholar
7. Kruk, M.; Jaroniec, M. Chem. Mater. 2001, 13, 3169–3183.Google Scholar