Hostname: page-component-78c5997874-94fs2 Total loading time: 0 Render date: 2024-11-17T18:09:43.420Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Property Measurement of Interconnect Materials by Magnetostrictive Sensors

Published online by Cambridge University Press:  26 February 2011

Cai Liang ,
Leslie Mathison  and
Barton C. Prorok
Cai Liang
Affiliation:
[email protected], Auburn University, 275 Wilmore Laboratory, Auburn, AL, 36849-5341, United States
Leslie Mathison
Affiliation:
[email protected], Auburn University, Auburn, AL, 36849-5341, United States
Barton C. Prorok
Affiliation:
[email protected], Auburn University, Auburn, AL, 36849-5341, United States
Get access

Abstract

This paper reports on the measurement of elastic modulus for some electronic thin film materials used in electronic interconnects by a magnetostrictive sensor. Thin film materials of Au, Sn, In and Au-rich lead free solder (AuSn) were sputter deposited onto well defined strips of Metglas™. This material possesses magnetostrictive properties whereby it deforms when subjected by a magnetic field and generates a magnetic field when deformed. The MetglasTM strip is driven to resonance via a modulated magnetic field generated by a coil. The elastic modulus of the above materials was determined by measuring the resonant frequency of the sensors before and after film deposition and using the frequency shift, two analytical approaches were employed to extract values. The as sputtered films were examined by X-ray Diffraction (XRD) and Scanning Election Microscope (SEM) to characterize their microstructures. The elastic modulus of Au films was determined by employing two mathematical methodologies that resulted in values of 71.2GPa and 75.9GPa, which exhibit less than 5% divergence. Errors in the different measuring methodologies are discussed. Moreover, elastic modulus values of solder materials of AuSn (80/20 wt%), tin and indium films, which were also measured in their as deposited forms, will be discussed. This method represents a potentially new, non-destructive method to determine critical material properties of as deposited materials.

Keywords

microelectronicsthin filmsoldering
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 968: Symposium V – Advanced Electronic Packaging , 2006 , 0968-V04-07
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Hashimonto, T., Nakasuga, Y., Yamada, Y., Terui, H., Yanagisawa, M., Akahori, Y., Tohmori, Y., Kato, K., and Suzuki, Y., Journal of Lightwave Technology, vol. 16, pp. 1249–1258, 1998.Google Scholar
[2] Kim, D. and Lee, C. C., Materials Science and Engineering: A, vol. 416, pp. 74–79, 2006.Google Scholar
[3] Cheng, Y. T., Lin, L., and Najafi, K., MEMS '99. Twelfth IEEE International Conference, 1999.Google Scholar
[4] Vlassak, J. J. and Nix, W. D., Journal of Materials Research, vol. 7, pp. 3242–3249, 1992.Google Scholar
[5] Rouzaud, A., Barbier, E., and Quesnel, E., Thin Solid Films, vol. 270, pp. 270–274, 1995.Google Scholar
[6] Espinosa, H. D. and Prorok, B. C., Materials Research Society Symposium Proc., vol. 695, 2001.Google Scholar
[7] Ohoka, T., , N. T., and Ono, T., Journal of Materials science, vol. 39, pp. 4379–4381, 2004.10.1023/B:JMSC.0000033432.31987.67Google Scholar
[8] Schmidt, S. and Grimes, C. A., Sensors and Actuators A: Physical, vol. 94, pp. 189–196, 2001.Google Scholar
[9] Liang, C. and Prorok, B. C., Micromechanics and Microengineering, submitted, 2006.Google Scholar
[10] Chiu, K.-F., Lin, H. C., Lin, K. M., Lin, T. Y., and Shieh, D. T., Journal of The Electrochemical Society, vol. 153, pp. A920–A924, 2006.Google Scholar
[11] Winterstein, J. P., LeBret, J. B., and Norton, M. G., J. Mater. Res., vol. 19, pp. 689–692, 2004.Google Scholar
[12] Peraud, S., Pautrot, S., Villechaise, P., and Mendez, J., Thin Solid Films, vol. 292, pp. 55–60, 1997.10.1016/S0040-6090(96)08998-5Google Scholar
[13] Ye, X. Y., Zhou, Z. Y., Yang, Y., and Yao, J., Sensors and Actuators A, vol. 54, pp. 750–754, 1996.Google Scholar