Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-29T07:10:38.533Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties Of Cu-Based Composites with in Situ Formed Ultrafine Filaments

Published online by Cambridge University Press:  15 February 2011

J. Bevk ,
W. A. Sunder ,
G. Dublon  and
David E. Cohen
J. Bevk
Affiliation:
Bell LaboratoriesMurray Hill, New Jersey 07974USA
W. A. Sunder
Affiliation:
Bell LaboratoriesMurray Hill, New Jersey 07974USA
G. Dublon
Affiliation:
Division of Applied SciencesHarvard University Cambridge, Massachusetts 02138USA
David E. Cohen
Affiliation:
Division of Applied SciencesHarvard University Cambridge, Massachusetts 02138USA
Get access

Abstract

Elastic and plastic properties of in situ Cu-based composites with Nb, V, and Fe filaments are reviewed. The evidence is presented for a pronounced size dependence of both the ultimate tensile strength and the Young's moduli. In composites with the smallest filaments (d∼50–200Å) and filament densities as high as 1010/cm2 dislocation density reaches values of 1013 cm/cm3. The yield stress of these samples increases dramatically over the predictions based on the “rule of mixtures” and their ultimate tensile strength approaches the estimated theoretical strength of the material (∼2.7GPa). The observed decrease of Young's modulus as a function of inverse wire diameter in the as-drawn composites is attributed to lattice softening due to high density of extended lattice defects. Upon annealing, Young's modulus increases by as much as 100% and exceeds the maximum values calculated from bulk elastic constants. Possible mechanisms leading to modulus enhancement and to related changes in magnetic and superconducting behavior of in situ composites are discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 12: Symposium L – In Situ Composites IV , 1981 , 121
Copyright
Copyright © Materials Research Society 1982

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Bevk, J., Harbison, James P. and Bell, Joseph L., “Anomalous Increase in Strength of in situ Formed Cu-Nb Multifilamentary Composites,” J. Appl.Phys. 49(12)(1978) pp. 6031–38.Google Scholar
2. Hosford, W. F. Jr., “Microstructural Changes During Deformation of [011] Fiber-Textured Metals,” Trans. Metall. Soc. AIME, 230(1) (1964) pp. 12–15.Google Scholar
3. Levi, F. P., “Permanent Magnets Obtained by Drawing Compacts of Parallel Iron Wires,” J. Appl. Phys. 31(8) (1960) pp. 1469–71.CrossRefGoogle Scholar
4. Cline, H. E., Strauss, B. P., Rose, R. M. and Wulff, J., “Superconductivity of a Composite of Fine Niobium Wires in Copper, J. Appl. Phys., 37(1) (1966) pp. 5–8.Google Scholar
5. Bevk, J. and Karasek, K. R., “High Temperature Strength and Fracture Mode of in situ Formed Cu-Nb Multifilamentary Composites,” pp. 101–113 in New Developments and Applications in Composites, Kuhlmann-Wilsdorf, Doris and Harrigan, William C. Jr., eds.; AIME, Warrendale, PA, 1979.Google Scholar
6. Frommeyer, G. and Wassermann, G., Microstructure and Anomalous Mechanical Properties of in situ-Produced Silver-Copper Composite Wires,” Acta Met., 23(11) (1975) pp. 1353–60.Google Scholar
7. Wahl, H. P. and Wassermann, G., “Anomalien der Eigenschaften dünner Drähte aus Eisen-Silber-Legierungen”, Z. Metallkd., 61(4) (1970) pp. 326–339.Google Scholar
8. Karasek, Keith R. and Bevk, J., “Normal-state Resistivity of in situ Formed Ultrafine Filamentary Cu-Nb Composites,” J. Appl. Phys. 52(3) (1981) pp. 1370–75.Google Scholar
9. Karasek, Keith R. and Bevk, J., “Dislocation Resistivity in in situ Formed Cu-Nb Multifilamentary Composites,” Scripta Met. 14(4) (1980) pp. 431–435.Google Scholar
10. Bevk, J., Harbison, James P., Habbal, F., Wagner, G. R. and Braginski, A. I., “Superconducting Critical Properties and ac Losses in a Large Sample of in situ Formed Cu-Nb3 Sn Composite,” Appl. Phys. Lett., 36(1)(1980) pp. 85–87.Google Scholar
11. Bevk, J. and Habbal, F., “Stress Effects in Superconducting Cu-V3Ga in situ Composites,” Appl. Phys. Lett., 36(4) (1980) pp. 336–338.Google Scholar
12. Cohen, David E. and Bevk, J., “Enhancement of the Young's Modulus in the Ultrafine Cu-Nb Filamentary Composites,” Appl. Phys. Lett., 39(8) (1981) pp. 595–597.Google Scholar
13. Dublon, G., Habbal, F. and Bevk, J., “In situ Formed Permanent Magnet Cu-Fe Multifilamentary Composites,” Appl. Phys. Lett. 39(8) (1981) pp. 659–661.Google Scholar
14. Dublon, G., unpublished results.Google Scholar