Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-16T17:04:34.108Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Properties of Boron Doped Diamond Films Prepared by MPCVD

Published online by Cambridge University Press:  01 February 2011

Qi Liang ,
Shane A. Catledge  and
Yogesh K. Vohra
Qi Liang
Affiliation:
Department of Physics, University of Alabama at Birmingham (UAB), Birmingham, AL 35294–1170, U.S.A.
Shane A. Catledge
Affiliation:
Department of Physics, University of Alabama at Birmingham (UAB), Birmingham, AL 35294–1170, U.S.A.
Yogesh K. Vohra
Affiliation:
Department of Physics, University of Alabama at Birmingham (UAB), Birmingham, AL 35294–1170, U.S.A.
Get access

Abstract

A chemical vapor deposition hydrogen/methane/nitrogen feedgas mixture with unconventionally high methane (15% CH4 by volume) normally used to grow ultra-hard and smooth nanostructured diamond films on Ti-6Al-4V alloy substrates was modified to include diborane (10% B2H6 in hydrogen) for boron-doping. The flow rate for B2H6 was varied to investigate its effect on plasma chemistry, film structure, and mechanical properties. It was found that boron in the plasma can easily be incorporated into diamond films and change the lattice parameter and affect film structure as measured by Raman spectroscopy. Grazing angle x-ray diffraction shows a strong dependence of diamond lattice parameter with diborane flow rate and B2H6:CH4 flow rate ratio. Thermal stability of these films was evaluated by heating in an oxygen environment above 700 °C. Nanoindentation measurements show that the films have high hardness close to that of nanostructured diamond. High film hardness and toughness, combined with good thermal stability and low surface roughness indicate great potential as wear resistant coatings able to withstand high temperature oxidizing environments.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 791: Symposium Q – Mechanical Properties of Nanostructured Materials and Nanocomposites , 2003 , Q8.19
Copyright
Copyright © Materials Research Society 2004

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Bulut, Mevlut, Catledge, Shane A., Vohra, Yogesh K. and Camata, P. in Surface Engineering 2002--Synthesis, Characterization and Applications, edited by Kumar, Ashok, Meng, Wen Jin, Cheng, Yang-Tse, Zabinski, Jeffrey S., Doll, Gary L., Veprek, Stan, (Mater. Res. Soc. Proc. 750, Pittsburgh, PA, 2002) pp. Y2.9 Google Scholar
2. Brunet, F., Deneuville, A., Germi, P., Pernet, M. and Gheeraert, E., J. Appl. Phys. 81, 1120 (1997)Google Scholar
3. Brunet, F., Germi, P., Pernet, M., Deneuville, A., Gheeraert, E., Laugier, F., Burdin, M., Rolland, G., Diamond Rel. Mater. 7, 869 (1998)Google Scholar
4. Hartmann, P., Haubner, R., Lux, B., Diamond Rel. Mater. 6, 456 (1997)Google Scholar
5. Zhang, R.J., Lee, S.T., Lam, Y.W., Diamond Rel. Mater. 5, 1288 (1996)Google Scholar
6. Liang, Qi, Catledge, Shane A., and Vohra, Yogesh K., Appl. Phys. Lett. 83, 24 (2003)Google Scholar
7. Catledge, Shane A., Borham, James, Vohra, Yogesh K., Lacefield, William R., and Lemons, Jack E., J. Appl. Phys., 91, 5347 (2002).Google Scholar