Hostname: page-component-6bf8c574d5-9nwgx Total loading time: 0 Render date: 2025-02-20T14:58:15.710Z Has data issue: false hasContentIssue false
  • English
  • Français

The Mechanical Properties of a Novel Si3N4-Amorphous Si3N4 Composite

Published online by Cambridge University Press:  25 February 2011

Ivar E. Reimanis ,
J. J. Petrovic ,
H. Suematsu ,
T. E. Mitchell  and
O. S. Leung
Ivar E. Reimanis
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
J. J. Petrovic
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
H. Suematsu
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
T. E. Mitchell
Affiliation:
Los Alamos National Laboratory, Los Alamos, NM 87545
O. S. Leung
Affiliation:
Materials Science and Engineering Department, University of California, Berkeley, CA 94720
Get access

Abstract

The hardness and fracture toughness of a model two-phase composite consisting of crystalline Si3N4 particles in a matrix of amorphous Si3N4 are examined. The composite is created by heat treating high purity, partially amorphous CVD Si3N4 in N2 for various times and temperatures in order to induce crystallization of the a phase. Microindentation tests at temperatures up to 1200 °C are conducted to evaluate the high temperature hardness and fracture toughness. The role of the microstructure is examined using optical and transmission electron microscopy. Finally, the relationship between the microstructure and the mechanical properties is discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 287: Symposium K – Silicon Nitride Ceramics–Scientific and Technological Advances , 1992 , 499
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Ruhle, M. and Evans, A. G. Progress in Materials Science Vol. 33, pp. 85–167 (1989).Google Scholar
[2] Becher, P. F. J. Amer. Ceram. Soc. Vol. 74, pp255–269 (1991).Google Scholar
[3] Anstis, G. R., Chantikul, P., Lawn, B. R. and Marshall, D. B. J. Amer. Ceram. Soc. Vol. 64, No. 9, pp 533–538 (1981).Google Scholar
[4] Peuckert, M., Vaahs, T. and Bruck, M. Adv. Mater. 2, No. 9, pp. 398–404 (1990).Google Scholar
[5] Green, D. J. in Fracture Mechanics of Ceramics, vol. 5, eds. Bradt, R. C., Evans, A. G., Hasselman, D. P. and Lange, F. F., pp. 457–478, Plenum Press, NY (1983).Google Scholar
[6] Suematsu, H., Mitchell, T. E. and Petrovic, J. J., in this symposium.Google Scholar
[7] Niihara, K. and Hirai, T. J. Mater. Sci. 11, pp. 593–603, (1976).Google Scholar