Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-17T16:08:53.157Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Interconnects to Silicon Integrated Circuits

Published online by Cambridge University Press:  21 February 2011

Charles A. Steidel
Charles A. Steidel*
Affiliation:
Intel Corporation, 145 S. 79th Street, Chandler, AZ 85226
Get access

Abstract

There are three predominant interconnection technologies in use today for silicon integrated circuits: wire bonding; TAB (tape automated bonding); and C4 (controlled collapse chip connection). This paper briefly reviews each of these technologies for their strengths and weaknesses but focuses especially on wire bonding for single chip VLSI applications.

Although wire bonding has been in widespread use ever since the invention of the small scale integrated circuit, the technique is still applicable for today's much larger and denser chips. With leadcounts up to 250 or even higher, many challenges are presented for equipment accuracy and speed and in package design, where novel techniques often are required to prevent the package from being the limiting factor in chip interconnection. These challenges are discussed in some detail.

The paper concludes with a discussion of the future direction for mechanical connections as influenced by the technical and cost requirements of both the chip and the system in which it resides.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 108 , 1987 , 347
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Totta, P.A. and Sopher, R. P., ”SLT device metallurgy and its monolithic extension”, IBM J. Res. Dev., 13, 1969, p.226.Google Scholar
[2]Shah, Gautan N., Levine, Lee R. and Patel, Dipak I. “Advances in wire bonding technology for high lead count, high density devices”, in Proc. 37th Electronic Components Conf., 1987, pp.33–39.Google Scholar
[3]Barlett, Charles J., Segelken, John M. and Teneketges, Nicholas A., ”Multi-chip packaging design for VLSI based systems”, in Proc. 37th Electronic Components Conf., 1987, pp.518–525.Google Scholar
[4]Steidel, Charles A., “Assembly techniques and packaging”, in Sze, S.M., Ed., VLSI Technology, McGraw-Hill, 1983.Google Scholar
[5]Kawanobe, T., Miyamoto, K. and Hirano, H., ”Tape automated bonding process for high lead count LSI”, in Proc. Electronic Components Conf., 1983, pp.221–226.Google Scholar
[6]“Tab for VLSI coming from Fairchild”, Electronics Aug. 20, 1987, p32.Google Scholar
[7]Abrahm Bar-Cohen, “Thermal management of air - and liquid cooled multichip modules”, IEEE Trans. Components, Hybrids, Manuf. Technol., vol CHMT-10, no.2, 1987, pp.159–175.Google Scholar
[8]Pease, R.F.W., Braman, J.C., Kwon, O.K., Hong, S., Douglas, S.C., Longley, B.W. and Poal, A.F., ”High Performance Packaging for VLSI Systems”, Advanced Research in VLSI “New Technologies For New Architectures”, Stanford University, Stanford, C.A. March 23–25, 1987.Google Scholar