Hostname: page-component-586b7cd67f-dlnhk Total loading time: 0 Render date: 2024-11-29T07:35:20.055Z Has data issue: false hasContentIssue false
  • English
  • Français

Mechanical Behavior Of Elastomeric Stamps During Microcontact Printing Patterns: Direct Observation Of Stamps And Inks

Published online by Cambridge University Press:  10 February 2011

Gregory S. Blackman ,
Anand Jagota  and
Kenneth G. Sharp
Gregory S. Blackman
Affiliation:
E.I. du Pont de Nemours and Co., Inc., Central Research Department, Wilmington, DE 19880-0323
Anand Jagota
Affiliation:
E.I. du Pont de Nemours and Co., Inc., Central Research Department, Wilmington, DE 19880-0323
Kenneth G. Sharp
Affiliation:
E.I. du Pont de Nemours and Co., Inc., Central Research Department, Wilmington, DE 19880-0323
Get access

Abstract

Microcontact printing is a straightforward and effective method for generating surface patterns of micron or submicron lateral dimensions. The fidelity of the ultimate pattern is a complex interplay of mechanical behavior of the elastomeric stamp, fluid transfer between surfaces and the ability of the ink to self-assemble on the new surface. We present here experimental observations and modeling of stamp deformation during precise external loads and visualization of inked surfaces by high contrast analytical methods. Stamp behavior was observed visually in an inverted microscope and load-displacement relationships used to determine onset of failure modes such as roof collapse and buckling of slender relief features as a function of stamp geometry. The load was applied with a glass sphere so as to obviate problems with alignment and to precisely determine contact areas.

A “robotic stamper” fabricated from an AFM instrument can deliver ink under conditions of precise load. Surfaces inked with varying densities or combinations of SAMs can be imaged with excellent contrast by scanning surface potential microscopy (SSPM). The same area of the sample can then be examined using time-of-flight SIMS or other surface analytical technique with no additional etching or sample preparation. In this way the fidelity and density of the patterned monolayers can be evaluated. The effect of load on ink pattern quality can also be established.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 778: Symposium U – Mechanical Properties Derived from Nanostructuring Materials , 2003 , U7.11
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Sylgard 184, manufactured by Dow Corning Corp., is by far the most common stamp material.Google Scholar
2. Wilbur, J. L., Kumar, A., Kim, E., Whitesides, G. M., Adv. Mater. (Weinheim, Ger.) 6, 600–4 (1994).Google Scholar
3. Schmid, H., Michel, B., Macromolecules 33, 3042–3049 (2000).Google Scholar
4. Biebuyck, H. A., Larsen, N. B., Delamarche, E., Michel, B., IBM J. Res. Dev. 41, 159–170 (1997).Google Scholar
5. Hui, C. Y., Jagota, A., Lin, Y. Y., Kramer, E. J., Langmuir 18, 1394–1407 (2002).Google Scholar
6. Hui, C. Y., Jagota, A., Lin, Y. Y., Kramer, E. J., Proceedings of the Annual Meeting of the Adhesion Society 25th, 159–161 (2002).Google Scholar
7. Hong, S., Zhu, J., Mirkin, C. A., Science (Washington, D. C.) 286, 523–525 (1999).Google Scholar
8. Getty, R. R., Alvarez, R., Bonnell, D. A., Sharp, K. G., Percec, S., Hietpas, P. B., Materials Research Society Symposium Proceedings 727, 155–160 (2002).Google Scholar
9. Jagota, A., Kristunas, D., Sharp, K. G., Materials Research Society Symposium Proceedings 728 (2002).Google Scholar
10.UV-ozone cleaning apparatus manufactured by UVOCS, Inc., Montgomeryville, PAGoogle Scholar
11.Time-of-flight Secondary Ion Mass SpectrometryGoogle Scholar