Hostname: page-component-cd9895bd7-gbm5v Total loading time: 0 Render date: 2024-12-27T01:48:01.705Z Has data issue: false hasContentIssue false

Magnetic Losses in Thick Barium-Hexaferrite Films on MgO (111)

Published online by Cambridge University Press:  18 March 2011

S.D. Yoon
Affiliation:
Department of Electrical and Computer Engineering, Northeastern University, Boston MA
S.A. Oliver
Affiliation:
Center for Subsurface and Sensing and Imaging Systems, Northeastern University, Boston MA
P. Shi
Affiliation:
Department of Electrical and Computer Engineering, Northeastern University, Boston MA P. Shi is now with Philips Research Ins., Richardson TX
X. Zuo
Affiliation:
Department of Electrical and Computer Engineering, Northeastern University, Boston MA
C. Vittoria
Affiliation:
Department of Electrical and Computer Engineering, Northeastern University, Boston MA
Get access

Abstract

Barium hexaferrite films having thickness from 3 to 30 μm were deposited onto 0.5 mm Magnesium Oxide (111) substrates, and were examined by vibrating sample magnetometry, torque magnetometry, x-ray diffraction, and scanning electron microscope measurements. Ferrimagnetic resonance measurements were taken with the magnetic field applied perpendicular to the film plane. The FMR linewidth values for as-produced 3 - 30 μm films was 0.45 - 0.70 kOe, and was reduced to 0.06 - 0.45 kOe after annealing at 1000 °C for 2 hours. Further annealing increased the linewidth. The FMR linewidth for the 30 μm thick film was also found to decrease upon mechanically removing 55 ∼ 77 % of the substrate thickness. A 6-fold in-plane anistropy symmetry in the anisotropy energy was observed in torque magnetometry measurements for films thicker than 30 μm. These results can be interpreted as due to film inhomogeneity, stress, and the growth of small regions of non c-axis textured material.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Shi, P., Doctoral Dissertation, Northeastern University, (2000).Google Scholar
2. Oliver, S.A., Yoon, S.D., Kozulin, I., Chen, M.L., and Vittoria, C., “Growth and characterization of thick oriented barium hexaferrite films on MgO (111) substrates”, Appl. Phys. Lett. 76, 24, (2000).Google Scholar
3. Labeyrie, M., Mage, J.C., Simonet, W., Devignes, J.M., and Gall, H. Le., “FMR linewidths of barium hexaferrite at millimeter wavelengths”, IEEE Trans. Mag., MAG–20, 1224 (1984).Google Scholar
4. Shinde, S.R., Lofland, S.E., Ganpule, C.S., Bhagat, S.M., Ogale, S.B., Ramesh, R., and Venkatesan, T., “Improvement in spin-wave resonance charateristics of epitaxial barium-ferrite thin films by using and alumina-doped strontium-ferrite buffer layer”, Appl. Phys. Lett. 74, 4, (1999).Google Scholar
5. Shinde, S.R., Lofland, S.E., Ganpule, C.S., Ogale, S.B., Bhagat, S.M., Venkatesan, T., and Ramesh, R., “Realization of epitaxial barium ferrite films of high crystalline quality with small resonance losses”, J. Appl. Phys. 85, 10, (1999).Google Scholar
6. Chikazumi, Soshin, “Physics of ferromagnetism, 2nd Ed.”, New York, Oxford University Press Inc., (1997).Google Scholar
7. Dorsey, P.C., Chrisey, D.B., Horwitz, J.B., Lubitz, P. and Auyeung, R.C.Y., “Oriented barium hexaferrite thick films grown on c-plane and m-plane shapphire substrates”,IEEE Trans. Mgn. 30, 4512 (1994).Google Scholar
8. Oliver, S.A., Chen, M.L., Kozulin, I., and Vittoria, C., “Structure and magnetic properties of barium hexaferrite films deposited at low oxygen pressures”, J. of Magnetism and Magnetic Materials, 213, pp. 326334, (2000).Google Scholar
9. Oliver, S.A., Kozulin, I., McGruer, N.E., Yoon, S.D., and Vittoria, C., “Cracking and delamination of hetroepitaxial barium hexaferrite films”, to appear in Recent Developments in Oxide and Metal Epitaxy – Theory and Experiments, Materials Research Society Proceedings, (2000).Google Scholar
10. Suhir, E., “Stresses in bi-metal strip thermostats”, J. Appl. Mechanics 53, pp. 657660 (1986).Google Scholar
11. Kojima, H., in “Ferromagnetic Materials vol. 3”, edited by Wohlfarth, E.P., Amsterdam, North-Holland Publ., Ch. 5, (1982).Google Scholar