Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-23T16:33:36.882Z Has data issue: false hasContentIssue false

Lower Temperature Si Thin Films by Metal Induced Growth for Lower Cost Solar Cells

Published online by Cambridge University Press:  31 January 2011

Peter T Mersich
Affiliation:
[email protected], University at Buffalo, Electrical Engineering, 332 Bonner Hall, Buffalo, New York, 14150, United States
Wayne A Anderson
Affiliation:
[email protected], University at Buffalo, Electrical Engineering, Buffalo, New York, United States
Rossman F Giese
Affiliation:
[email protected], University at Buffalo, Geology, Buffalo, New York, United States
Get access

Abstract

Metal induced growth (MIG) was used to form epitaxial thin films of microcrystalline Si (μc-Si). By substituting Al as the catalyst metal in place of the usual Ni, x-ray diffraction (XRD) confirmed that μc-Si was successfully grown at temperatures between 350-525°C. At 525°C, a preferred orientation of (220) Si was observed with additional (111) and (311) Si orientations, while a temperature of 350°C resulted in a shift in preferred orientation to (111) Si. The lower limit for Al thickness was found to be between 10-20 nm with little crystallization and a smooth surface observed at 10 nm with XRD and SEM, respectively. Electrical measurements on Schottky diodes revealed space-charge limited conduction (SCLC) with an exponential distribution of trap levels due to diffusion of Al atoms into the Si, which was supported by analysis with energy dispersive x-ray spectroscopy (EDX) near the film surface. By depositing a thin layer of Co on top of Al prior to sputtering, the films exhibited increased crystallinity and a more uniform surface likely due to increased confinement of Al atoms. Electrical measurements demonstrated a shift from SCLC to thermionic emission in resulting Schottky diodes.

Type
Research Article
Copyright
Copyright © Materials Research Society 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Hegedus, S. Prog. Photovoltaics 14 (5), 393411(2006).Google Scholar
2 Meier, J. Fluckiger, R. Keppner, H. Shah, A. Appl.Phys. Lett. 65 (7), 860862(1994).Google Scholar
3 Kim, J. Anderson, W.A. Sol. Energy Mater. Sol. Cells 91 (6), 534538(2007).Google Scholar
4 Knaepen, W. Detavernier, C. Meirhaeghe, R.L. Van, Sweet, J.J. Lavoie, C. Thin Solid Films 516 (15), 49464952(2008).Google Scholar
5 Jin, Z. Bhat, G. Yeung, M. Kwok, H. Wong, M. J. Appl. Phys. 84 (1), 194200(1998).Google Scholar
6 Nast, O. Wenham, S. J. Appl. Phys. 88 (1), 124132(2000).10.1063/1.373632Google Scholar
7 Matsumoto, T. Mimura, H. Koshida, N. Masumoto, Y. Appl. Surf. Sci. 142 (1-4), 569573(1999).Google Scholar