Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-25T17:51:42.303Z Has data issue: false hasContentIssue false
  • English
  • Français

Long-Term Creep and Oxidation Behavior of a Laves Phase-Strengthened NiAl-Ta-Cr Alloy for Gas Turbine Applications

Published online by Cambridge University Press:  21 March 2011

Martin Palm  and
Gerhard Sauthoff
Martin Palm
Affiliation:
Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Str. 1, D-40237 Düsseldorf, Germany
Gerhard Sauthoff
Affiliation:
Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Str. 1, D-40237 Düsseldorf, Germany
Get access

Abstract

A Laves phase strengthened NiAl-Ta-Cr alloy (IP 75) has been developed for structural applications in gas turbines as well as in heat exchangers. It has a lower density and a higher thermal conductivity as well as a higher melting point than conventional superalloys. Different methods for alloy production have been established including investment casting (IC) and a powder metallurgical method (PM). Creep properties have been determined in compression and tension. Tension tests up to 10000 hours were performed at 900 °C and 1000 °C for both PM and IC materials. The oxidation behavior of the PM and IC material was studied for up to 1000 hours by thermogravimetry in air at constant temperature between 600 °C and 1300 °C. The results are compared with results obtained from long-term isothermal and cyclic oxidation experiments in air at 1200 °C for 17900 hours. Microstructures and scales were examined by light optical and scanning microscopy, X-ray powder diffraction and electron probe microanalysis.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 646 , 2000 , N6.8.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Zeumer, B. and Sauthoff, G., Intermetallics, 5, 563 (1997).Google Scholar
2. Zeumer, B. and Sauthoff, G., Intermetallics, 5, 641 (1997).Google Scholar
3. Zeumer, B. and Sauthoff, G., Intermetallics, 6, 451 (1998).Google Scholar
4. Zeumer, B., Sanders, W., Sauthoff, G., Intermetallics, 7, 889 (1999).Google Scholar
5. Palm, M., Preuhs, J., Sauthoff, G., J. Mater. Process. Technol., submitted.Google Scholar
6. Brumm, M.W. and Grabke, H.J., Corrosion Sci., 33, 1677 (1992).Google Scholar
7. Palm, M., Sanders, W., Sauthoff, G., Z. Metallkde., 87, 390 (1996).Google Scholar