Hostname: page-component-848d4c4894-sjtt6 Total loading time: 0 Render date: 2024-07-05T12:54:40.164Z Has data issue: false hasContentIssue false

Liquid Mediated Pulsed Laser Processing of Silicon

Published online by Cambridge University Press:  26 February 2011

S. K. Hofmeister
Affiliation:
Department of Materials Science and EngineeringNorth Carolina State UniversityRaleigh, NC 27695
M. L. Sito
Affiliation:
Department of ChemistryNorth Carolina State UniversityRaleigh, NC 27695
O. H. Auciello
Affiliation:
Department of Nuclear EngineeringNorth Carolina State UniversityRaleigh, NC 27695
Get access

Abstract

We have investigated the formation of thin layers of carbides and nitrides by irradiating silicon (100) single crystal immersed in clear organic solvents or liquid ammonia. The liquids were transparent to the excimer laser (λ=308 nm, τ45 ns) used, at energy densities from 0.5 to 3.0 Jcm−2. Most of the laser energy was absorbed by the silicon specimens above a certain threshold to cause melting of the surface to a depth of approximately 250 nm. The pool of liquid silicon reacts with the solvents or ammonia in a saturated high pressure vapor phase for a duration of approximately 200 ns per pulse. The specimens were irradiated with a number of pulses ranging from 1 to 50. The films were then analyzed for structure and composition using TEM, AES, and IR spectroscopy. We report here calculations of laser-solid interactions, microstructure, and properties of the resulting thin films.

Type
Research Article
Copyright
Copyright © Materials Research Society 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Poate, J.M. and Mayer, J.W., eds., Laser Annealing of Semiconductors (Academic, New York, 1982)Google Scholar
2 Narayan, J., White, C.W., Aziz, M.J., Stritzler, B and Walthuis, A, J. Appl. Phys. 52, 564 (1985)Google Scholar
3 White, C.W., Pronko, P.P., Wilson, S.R., Appleton, B.R., Narayan, J. and Young, R.T., J. Appl. Phys. 50 3261 1979 Google Scholar
4 Houle, F.A., Laser Assisted Deposition, Etching and Doping, edited by Allen, Susan D., Proc. SPIE (Int. Soc. Opt. Eng.) 459, 110 (1984)Google Scholar
5 Narayan, J., Biunno, N., Singh, R., Holland, O.W. and Auciello, O., Appl. Phys. Lett. 51 1845 (1987)Google Scholar
6 Ogale, S.B., Polman, A., Quentin, F.O.P., Roorda, S. and Saris, F.W. Appl. Phys. Lett. 50 138 (1987)CrossRefGoogle Scholar
7 Singh, R. K., M.S. Thesis North Carolina State University (1987)Google Scholar
8 Wieder, H., Cardona, M. and Guarnieri, C. R., Phys. Stat. Sol. 92 99 (1979)Google Scholar
9 Luongo, J. P., Appl. Spec. 38 195 (1984)Google Scholar