Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-19T04:16:43.113Z Has data issue: false hasContentIssue false
  • English
  • Français

Laser-Ablation of Various Oxide Materials Over Large Areas

Published online by Cambridge University Press:  16 February 2011

James A. Greer  and
H. Jerrold Van Hook
James A. Greer
Affiliation:
Raytheon Research Division 131 Spring Street, Lexington, MA 02173
H. Jerrold Van Hook
Affiliation:
Raytheon Research Division 131 Spring Street, Lexington, MA 02173
Get access

Extract

Laser-Ablation (LA) had received little attention prior to the first published report of depositing Y1Ba2Cu3O7-x) (YBCO) thin films with this novel method.[1] However, LA has been used to produce films of infrared materials for some time[2], and the recent discovery of 1-igh Temperature Superconductors (HITS) has sparked considerable interest in this relatively obscure Physical Vapor Deposition (PVD) technique. Over the past three years, a variety of in-situ LA processes for producing films of HTS compounds, as well as other materials, have been reported in the literature.[3,4,5,6,7] Like any other PVD technique, LA has its own unique advantages anid disadvantages. The main advantages of LA include: 1) its ability to accurately replicate the stoichiometry of the ablation target within the laser-deposited film; 2) the high energy of the ablated species which may enhance the quality of film growth; 3) it does not require hot filaments which allow a number of reactive gases to be present in the chamber during deposition; and 4) a wide array of complex chemical compounds can be deposited. Two of the main problems facing this emerging PVD technique have been: 1) it has been applied mostly to small area deposition (<6 cm2) with poor uniformity, and 2) the ablated films typically display a large number- of particles ranging in size from 0.5 μm to over 10 μm, whose presence may significantly hamper a number of microelectronic device applications.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 191: Symposium N – Laser Ablation for Materials Synthesis , 1990 , 171
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Dijkkamp, D., Venkatesan, T., Wu, X. D., Shaheen, S. A., Jisrani, N., Min-Lee, Y. M., McLean, W. L., and Croft, M., Appl. Phys. Lett., 51, 619 (1987).Google Scholar
2. Cheung, J. T. and Magee, T., J. Vacuumn Sci. Technol. A3, 1604 (1983).Google Scholar
3. Witanachchi, S., Kwok, H. S., Wang, X. W., and Shaw, D. T., Appl. Phys. Lett. 53, 234 (1988).Google Scholar
4. Koren, G., Gupta, A., and Baseman, R. J., Appl. Phys. Lett. 54, 1920 (1989).Google Scholar
5. Roas, B., Schultz, L., and Endres, G., Appl. Phys. Lett. 53, 1557 (1988).Google Scholar
6. Koren, G., Gupta, A., Geiss, E. A., Segmuller, A., and Laibowitz, R. B., Appl. Phys. Lett. 54, 1054 (1989).Google Scholar
7. Simon, R. W., Platt, C. E., Lee, A. E., Lee, G. S., Daly, K. P., Wire, M. S., Luine, J. A., Urbanik, M., Appl. Phys. Lett. 53, 2677 (1988).Google Scholar
8. Greer, J. A., In the Proceedings of the Third Annual Conference on Superconductivity and Applications, Buffalo, 1989.Google Scholar
9. Greer, J. A. and Hook, H. J. Van, In the Proceeding of the Materials Researach Society, Boston, 1989.Google Scholar
10. Applied Science and Technology, Inc., Woburn, MA.Google Scholar
11. Geller, S., Curlander, P. J., and Ruse, G. F., Mater. Res Bull. 9, 637 (1974).Google Scholar