Hostname: page-component-cd9895bd7-gxg78 Total loading time: 0 Render date: 2024-12-27T01:38:52.371Z Has data issue: false hasContentIssue false
  • English
  • Français

Laser Micro-machining of Three-Dimensional Microstructures in Optical Materials

Published online by Cambridge University Press:  31 January 2011

Xianghua Wang ,
Pui To Lai  and
Anthony H.W. Choi
Xianghua Wang
Affiliation:
[email protected], The University of Hong Kong, Department of Electrical and Electronics Engineering, Hong Kong, Hong Kong
Pui To Lai
Affiliation:
[email protected], The University of Hong Kong, Department of Electrical and Electronics Engineering, Hong Kong, Hong Kong
Anthony H.W. Choi
Affiliation:
[email protected], The University of Hong Kong, Department of Electrical and Electronics Engineering, Hong Kong, Hong Kong
Get access

Abstract

We demostrate an advanced precision cutting tool using a 349 nm nanosecond-pulsed UV laser micromachining setup. After expansion and collimation, the laser beam is directed vertically and focused with a high performance triplet lens. With an Al mirror inserted in the path of the convergent beam, the beam can be focused on a horizontal machining plane at any desired tilting angles. Microstructures of a wide range of geometries on hard materials can be formed using this custom machining method. Conventional linear and rotary machining on sapphire materials have been demonstrated.

Keywords

ablationlaser-induced reactionmicrostructure
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1179: Symposium BB – Material Systems and Processes for Three-Dimentional Micro-and Nanoscale Fabrication and Lithography , 2009 , 1179-BB06-30
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1 Lü, Li, Fuh, J., Wong, Yoke-San, “Overview of rapid prototyping and manufacturing,” Laser-Induced Materials and Processes for Rapid Prototyping, (Kluwer Academic 2001) pp. 1–8.Google Scholar
2 Gu, E., Jeon, C.W., Choi, H.W., Rice, G., Dawson, M.D., Illy, E.K. and Knowles, M.R.H., “Micromachining and dicing of sapphire, gallium nitride and micro-LED devices with UV copper vapour laser”, Thin Solid Films 453, 462 (2004).Google Scholar
3 Otani, T., Herbst, L., Heglin, M., Govorkov, S.V., and Wiessner, A.O., Appl. Phys. A 79, 1335 (2004).Google Scholar
4 Wang, X.H., Lai, P.T. and Choi, H.W., “Laser Micro-machining of Optical Microstructures with Inclined Sidewall Profile”, J. of Vac. Sci. and Tech. B. 2009 (unpublished)Google Scholar