Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-23T03:14:18.693Z Has data issue: false hasContentIssue false
  • English
  • Français

Laser Ablation Of Solid Ozone

Published online by Cambridge University Press:  10 February 2011

Hidehiko Nonaka ,
Tetsuya Nishiguchi ,
Yoshiki Morikawa ,
Masaharu Miyamoto  and
Shingo Ichimura
Hidehiko Nonaka
Affiliation:
Materials Science Division, Electrotechnical Laboratory, 1-1-4 Umezono, Tsukuba, lbaraki, 305-8568, Japan
Tetsuya Nishiguchi
Affiliation:
Meidensha Corp. 515 Kaminakamizo Higashimakado, Numazu, Shizuoka 410-8588, Japan
Yoshiki Morikawa
Affiliation:
Meidensha Corp. 515 Kaminakamizo Higashimakado, Numazu, Shizuoka 410-8588, Japan
Masaharu Miyamoto
Affiliation:
Meidensha Corp. 515 Kaminakamizo Higashimakado, Numazu, Shizuoka 410-8588, Japan
Shingo Ichimura
Affiliation:
Frontier Technology Division Electrotechnical Laboratory, 1-1-4 Umezono, Tsukuba, Ibaraki, 305-8568, Japan
Get access

Abstract

Species ablated from solid ozone by a UV laser were investigated using a time-of-flight method through a quadrupole mass filter. The results show that UV-laser ablation of solid ozone can produce a pulsed ozone beam with a translational energy far above that of room temperature. Highconcentration ozone from an ozone jet generator is solidified on a sapphire substrate attached to a copper block which is cooled to 30 to 60 K on a cryocooler head and the solid ozone is irradiated by pulsed laser light from a KrF laser (248 nm). The ablated species were a mixture of ozone and molecular oxygen as well as atomic oxygen due to photodissociation of ozone. At a substrate temperature of 30 K, the total amount of ablated ozone increases as the laser fluence increases to 13 mJcm−2. Beyond this fluence, enhanced decomposition of ozone occurs. Gaussian fitting of the time-of-flight signals of the ablated ozone reveals an average thermal energy exceeding 1,500 K. The velocity also increases when the laser fluence enters saturation at 2,300 K at 13 mJcm−2.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 617: Symposium J – Laser-Solid Interactionsfor Materials Processing , 2000 , J1.3
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Vanysek, P., Electrochemical series, Handbook of Chemistry and Physics, ed. Lide, D.R. (CRC Press, 1996) pp. 8:20–8:25.Google Scholar
2 Shimizu, T., Hirayama, F., Oka, K., Nonaka, H., Matsuda, M., and Arai, K., Appl. Phys. Lett. 64, 1289 (1994).Google Scholar
3 Lathrop, D.K., Lussek, S.E., and Buhrman, R.A., Appl. Phys. Lett., 51, 1554 (1987).Google Scholar
4 Hosokawa, S. and Ichimura, S., Rev. Sci. Instrum., 62, 1614 (1991).Google Scholar
5 Nakamura, K., Kurokawa, A., and Ichimrua, S., Jpn. J. Appl. Phys. 39 (2000) in press.Google Scholar
6 Kurokawa, A., Nakamura, K., Ichimura, S., and Moon, D. W., Appl. Phys. Lett., 76, 493 (2000).Google Scholar
7 Sekine, S., Ichimura, S., Shimizu, H., and Hashizume, H., Jpn. J Appl. Phys., 33, L387 (1994).Google Scholar
8 Cousins, L.M. and Leone, S.R., Chem. Phys. Lett., 155, 162 (1989).Google Scholar
9 Horvath, M., Bilitzky, L., and Huttner, J., Ozone (Elsevier, 1985) pp. 15.Google Scholar
10 Okabe, H., Photochemistry of Small Molecules (John Wiley & Sons, 1978) pp.237–244. The absorption coefficient therein of 120 atm−1cm−1, 0°C, base 10 and the density of 1.6 gcm−3 (page 22 of ref. 9) were used to estimate the absorption depth.Google Scholar
11 Bemderskii, A.V. and Wight, C.A., J Chem. Phys., 101, 292 (1994).Google Scholar
12 Sparks, R.K., Carlson, L.R., Shobatake, K., Kowalczyk, M.L., and Lee, Y.T., J. Chem. Phys., 72, 1401 (1980).Google Scholar