Hostname: page-component-78c5997874-4rdpn Total loading time: 0 Render date: 2024-11-19T06:06:45.370Z Has data issue: false hasContentIssue false
  • English
  • Français

Ito/A-Si:H Schottky Photodiode With Low Leakage Current And High Stability

Published online by Cambridge University Press:  10 February 2011

Qinghua Ma ,
Arokia Nathan  and
R.V.R. Murthy
Qinghua Ma
Affiliation:
Department of Electrical and Computer EngineeringUniversity of Waterloo, Waterloo, Ontario, CanadaN2L 3G1
Arokia Nathan
Affiliation:
Department of Electrical and Computer EngineeringUniversity of Waterloo, Waterloo, Ontario, CanadaN2L 3G1
R.V.R. Murthy
Affiliation:
Department of Electrical and Computer EngineeringUniversity of Waterloo, Waterloo, Ontario, CanadaN2L 3G1
Get access

Abstract

We report the design, fabrication, and characterization of an indium tin oxide/hydrogenated amorphous silicon (ITO/a-Si:H) Schottky photodiode based on room temperature deposition of ITO. The optical transmittance of the ITO is larger than 80% in the visible light range and its resistivity is less than 6 x 10-4 Ω-cm. The fabricated photodiode exhibits low leakage current and stable I-V characteristics. The leakage current is 7x10-10 A/cm2when biased at -2 V and the shift in leakage current stabilizes to a value less than 9% after 2 seconds of biasing at -2 V. The improvement in performance can be attributed to the high integrity ITO/a-Si:H interface achieved with the low temperature deposition.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 558: Symposium B – Flat-Panel Displays and Sensors-Principles, Materials… , 1999 , 231
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Street, R. A., Philosophical Magazine B, 63. No. 6, 1343–1363 (1991).Google Scholar
[2] Hoheisel, M., Brutscher, N., and Wieczorek, H., J. of Applied Physics, 66, 4466–4473 (1989).Google Scholar
[3] Ma, Q., Nathan, A., Abstract No. 720, Meeting Abstracts, The 194th Meeting of the Electrochemical Society, Inc., Boston, Nov. 1-6, 1998.Google Scholar
[4] Arch, J. K. and Fonash, S. J., J. of Appl. Phys., 72, 4483 (1992).Google Scholar
[5] Aflatooni, K., Nathan, A., Hornsey, R., Cunningham, I.A., and Chamberlain, S.G., Technical Digest, IEEE IEDM, December 7-10, Washington, D.C., 1997, 197–200.Google Scholar