Hostname: page-component-586b7cd67f-2brh9 Total loading time: 0 Render date: 2024-11-25T15:41:05.476Z Has data issue: false hasContentIssue false
  • English
  • Français

Intrinsic Gettering of Iron in Silicon: A Quantitative Study

Published online by Cambridge University Press:  28 February 2011

Etienne G. Colas ,
E.R. Weber  and
S. Hahn
Etienne G. Colas
Affiliation:
Department of Materials Science and Mineral Engineering University of California, Berkeley, Ca 94720
E.R. Weber
Affiliation:
Department of Materials Science and Mineral Engineering University of California, Berkeley, Ca 94720
S. Hahn
Affiliation:
Siltec, Mountain View, Ca 94043
Get access

Abstract

Intrinsic gettering of iron in silicon has been studied with a novel approach that involved the combination of two complementary techniques. Electron Paramagnetic Resonance (EPR) was used to determine the concentration of interstitial iron atoms which are electrically active in the silicon matrix. A systematic comparison of the effect of various oxygen precipitates of well defined morphologies on the solubility of iron was performed. A surprising result was found for bulk samples containing oxygen precipitates obtained after low temperature heat treatments (700ºC): the solubility of iron was reduced byalmost two orders of magnitude from the values obtained in untreated Cz silicon samples or in samples containing oxygen precipitates obtained at high temperature (1150ºC). The practical importance of this new result was demonstrated by a series of iron concentration measurements after various gettering and high temperature re-heating treatments.

Transmission Electron Microscopy (TEM) was used in order to confirm the proposed mechanism of formation of a new phase, different from FeSi2 in the silicon matrix. This new phase is assumed to limit the possible electrically active metallic content by acting as a boundary phase in quasi-equilibrium with interstitial iron atoms. Evidence ofthe formation of Fe2SiO4 was found in wafers that had been oxygenimplanted and subsequently subjected to similar precipitation and diffusion treatments than those performed with the bulk samples.

These findings suggest the possibility of dramatic improvements in the efficiency and the stability of the gettering process.

Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 71: Symposium F – Materials Issues in Silicon Integrated Circuit Processing , 1986 , 13
Copyright
Copyright © Materials Research Society 1986

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Ourmazd, A., in “Oxygen, Carbon, Hydrogen and Nitrogen in Silicon”, Eds. Corbett, J.W., Mikkelsen, L.C., Pearton, S.J. and Pennycook, S., Materials Research Society (1986), in print.Google Scholar
2. Colas, E.G., Weber, E.R. and Hahn, S.Oxygen, Carbon, Hydrogen and Nitrogen in Silicon,.Google Scholar
3. Bourret, A., Thibault-Desseaux, J., and Seidman, D.N., J. Appl. Phys. 55, 825 (1984)CrossRefGoogle Scholar
4. Ponce, F., Yamashita, T., Appl. Phys. letters 43, 1051, (1983)CrossRefGoogle Scholar
5. Colas, E.G., Weber, E.R., Appl. Phys. Letters, accepted for publication March 29, 1986, in print.Google Scholar
6. Weber, E. R., Riotte, H. G.: J. Appl. Phys. 51, 1484, (1980)Google Scholar
7. CRC Handbook of Chemistry and Physics, 63rd ed., eds Weast, R.C. and Astle, M.J. (CRC Press), 1982/1983.Google Scholar