Hostname: page-component-7bb8b95d7b-5mhkq Total loading time: 0 Render date: 2024-09-12T22:19:36.560Z Has data issue: false hasContentIssue false
  • English
  • Français

Infra-red curing methodology for Roll-to-Roll (R2R) manufacturing of conductive electrodes through inkjet technology applicable for devices in the field of flexible electronics

Published online by Cambridge University Press:  28 May 2015

Kalyan Yoti Mitra ,
Dana Weise ,
Melinda Hartwig  and
Reinhard. R. Baumann
Kalyan Yoti Mitra
Affiliation:
Technische Universität Chemnitz, Digital Printing and Imaging Technology, Chemnitz, Germany
Dana Weise
Affiliation:
Technische Universität Chemnitz, Digital Printing and Imaging Technology, Chemnitz, Germany
Melinda Hartwig
Affiliation:
Technische Universität Chemnitz, Digital Printing and Imaging Technology, Chemnitz, Germany
Reinhard. R. Baumann
Affiliation:
Technische Universität Chemnitz, Digital Printing and Imaging Technology, Chemnitz, Germany Fraunhofer Institute for Electronic Nano Systems (ENAS), Printed Functionalities, Chemnitz, Germany
Get access

Abstract

The Inkjet printing technology is a direct patterning technique to deposit functional materials with high precision and accuracy. This deposition technology is often used to manufacture conductive electrodes for different active and passive electronic devices on flexible foils. It is an up-scalable process in terms of printing devices from low (via. Sheet-to-Sheet, S2S platform) to high (via. Roll-to-Roll platform) quantities. For manufacturing of these conductive electrodes and hence electronic devices through the R2R platform, a suitable post-treatment/curing methodology is very much desired. In this work, the focus is concentrated on the curing methodology using the Infra-red radiation for both the inkjet-printed conductive electrodes and insulator layer, for completing a “proof of concept” Metal-Insulator-Metal (MIM) electronic device structure over the R2R platform. A conductive silver nano-particle and a polymeric dielectric ink are used to print the top and bottom conductive electrodes, with a middle insulator layer for the MIM structure respectively. It is observed that not only the printed silver electrode layers (both top and bottom) can be cured with the help of the Infra-red radiation, but also the insulator layer. Additionally, the layers constituting the MIM device structure is cured with the conventional curing methodology which in this case is thermal curing using a convection oven. This curing procedure for the printed functional layers is generally performed for the S2S manufacturing process. The conductive electrodes are then electrically characterized by measuring the sheet resistance (on the foil and dielectric layer) as a function of the un-conventional Infra-red radiation and conventional oven curing methodologies. The cured layers for both the conductive electrodes and insulator layers are morphologically analyzed for the layer thickness and homogeneity. The electrical performance of the cured insulator in form of the obtained capacitance from the MIM passive device is compared for the two mentioned curing methodologies.

Keywords

sinteringadditivesdevices
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1791: Symposium BB – Innovative Interconnects/Electrodes for Advanced Devices, Flexible and Green-Energy Electronics , 2015 , pp. 1 - 6
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Chung, S., Jang, J., Cho, J., Lee, C., Kwon, S., Hong, Y., “All-Inkjet-Printed Organic Thin Film Transistors with Silver Gate, Source/Drain Electrodes”, Jpn. J. Appl. Phys. 50, 2011, 03CB05, pp. 1–5.CrossRefGoogle Scholar
Fukuda, K., Takeda, Y., Mizukami, M., Kumaki, D, Tokito, S., “Fully solution-processed flexible organic thin film transistor arrays with high mobility and exceptional uniformity”, Scientific Reports, 4, 3947, 2014, pp. 1–8.Google Scholar
Niittynen, J., Abbel, R., Mäntysalo, M., Perelaer, J., Schubert, U. S., Lupo, D.: "Alternative sintering methods compared to conventional thermal sintering for inkjet printed silver nanoparticle ink", Thin Solid Films 556, 2014, 452–459.CrossRefGoogle Scholar
Perelaer, J., Schubert, U. S., “Novel approaches for low temperature sintering of inkjet-printed inorganic nanoparticles for roll-to-roll (R2R) applications”, Journal of Materials Research 28, 04, 2013, pp. 564–573.CrossRefGoogle Scholar