Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-27T02:14:33.370Z Has data issue: false hasContentIssue false
  • English
  • Français

Influence of heat input and solubilizing heat treatment on the impact properties of SAW joints in SAF 2205 duplex steel

Published online by Cambridge University Press:  28 February 2012

M. Merlin ,
R. Vazquez-Aguilar ,
C. Soffritti  and
A. Reyes-Valdes
M. Merlin
Affiliation:
Engineering Department, University of Ferrara, via Saragat 1, 44122 Ferrara
R. Vazquez-Aguilar
Affiliation:
Engineering Department, University of Ferrara, via Saragat 1, 44122 Ferrara
C. Soffritti
Affiliation:
Engineering Department, University of Ferrara, via Saragat 1, 44122 Ferrara
A. Reyes-Valdes
Affiliation:
Corporaciòn Mexicana de Investigaciòn en Materiales, Blvd. Oceanìa #190, Fracc. Saltillo 400, 25290 Saltillo, Coah. Mexico
Get access

Abstract

In this study the influence of heat input (HI) and heat treatment on submerged arc welded duplex SAF 2205 steel joints has been evaluated. In particular, multi-pass welding operations have been performed on 18 mm thick plates using four different heat inputs; a post-weld solubilizing heat treatment has been carried out in order to reduce the microstructural effects on the structure of the heat affected zone (HAZ). Instrumented impact strength tests have been performed on Charpy samples machined from the welded joints; the total absorbed energy and the two complementary contributions of initiation and propagation energies have been evaluated and correlated to the percentages of ferrite and austenite. The microstructures and the fracture profiles have been observed using an optical microscope (OM) and quantitatively analyzed by means of an image analyzer. A scanning electron microscope (SEM) equipped by energy dispersive X-ray spectroscopy (EDS) has been used to study the fractured surfaces. Hardness profiles have been performed across the joints in order to verify the hardness variations. A total absence of secondary phases has been found on the joints due to the performing of a suitable solubilizing heat treatment after the welding process. The results have shown that the impact properties of the samples have been mostly affected by the different heat inputs; in some cases a partial welding penetration has been found.

Keywords

Impact strength testweldingmicrostructure
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1381: Symposium S22 – Materials Welding and Joining Technologies , 2012 , imrc11-1381-S22-005
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Sieurin, H. and Sandström, R., Eng. Fract. Mech. 73, pp 377–390, (2006).Google Scholar
2. Satoa, Y. S., and Kokawab, H., presented at the 9th AWF Meeting International Welding Seminar, Migas Indonesia, (2007).Google Scholar
3. Hagg, F., Basco, P., presented at the 18th Spanish Technical sessions on welding, Madrid Spain, (2010).Google Scholar
4. Sato, Y. S., Nelson, T. W., Sterling, C. J., Steel, R. J. and Peterson, C. O., Mater. Science and Eng. A397, pp 376–384, (2005).Google Scholar
5. Di Caprio, G., Gli acciai inossidabili, edited by Biblioteca tecnica Hoepli Milano, 3rd ed., p 390, (1997).Google Scholar
6. Charles, J., Weld. World, 36, pp 43–54, (1995)Google Scholar
7. Nilson, J., Mater. Science Tech. 8, pp 685–700, (1992).Google Scholar
8. Nowacki, J., and Lukojc, A., J. Mater. Process. Tech. 164-165, pp 1074–1080, (2005).Google Scholar
9. Jana, S., J. Mater. Process. Tech. 33, pp. 247–261, (1992).Google Scholar
10. Ku, J.S., Ho, N.J., Tjong, S. C., J. Mater. Process. Tech. 63, pp 770–775, (1997).Google Scholar
11. Tavares, S. S. M., Terra, V. F., Pardal, J. M. and Cindra Fonseca, M. P., J. Mater. Science 40, pp. 145–154, (2005).Google Scholar
12. Kou, S. in Welding metallurgy, edited by Wiley Interscience (2003).Google Scholar
13. Uni En Iso 14556, (2003).Google Scholar