No CrossRef data available.
Article contents
Impurity Profiles in InP from Ion Implantation at Elevated Temperatures
Published online by Cambridge University Press: 26 February 2011
Abstract
The chemical profiles of Zn, Ge, and Se implanted into InP at elevated temperatures have been measured with secondary ion mass spectrometry and correlated to the implantation damage as deduced from RBS/channeling measurements. An asymmetric broadening of the chemical profiles towards the bulk was found for implantation temperatures above 150°C. This effect is concluded to be due to impurity channeling during implantation.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1992
References
REFERENCES
2.
Tell, B., Brown-Goebeler, K. F., and Cheng, C. L., Appl. Phys. Lett.
52, 299 (1988).Google Scholar
3.
Duhamel, N., Post, G., Krauz, P., Henoc, P., and Desconts, B., Solid State Phenomena
1&2
361 (1988).Google Scholar
6.
Woodhouse, J. D., Donnelly, J. P., Nitishin, P. M., Owens, E. B., and Ryan, J. L., Solid State Electron.
22, 677 (1984).Google Scholar
7. TRIM 88, Siegler, J. F., Biersack, J. P., and Littmark, U.. The Stopping and Range of Ions in Solids (Pergamon Press, New York
1985).Google Scholar
8.
Ridgway, M. C., Palmer, G. R., Elliman, R. G., Davies, J. A., and Williams, J. S., Appl. Phys. Lett.
58, 487 (1991).Google Scholar
9.
Djamei, M., Rao, E. V. K., and Krauz, P., Mater. Res. Soc. Symp. Proc, 92, 455 (1987).Google Scholar
10.
Kringhøj, P., Gribkovskii, V. V., and Nylandsted Larsen, A., Appl. Phys. Lett.
57, 1514 (1990).Google Scholar