Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-23T04:49:16.048Z Has data issue: false hasContentIssue false

Improvement of Fluorite Structures in M203-CeO2 (M=Sm, La) System Based on a Novel Effective Index

Published online by Cambridge University Press:  15 February 2011

Toshiyuki Mori
Affiliation:
First Research Group, National Institute for Research in Inorganic Materials, 1–1, Namiki, Tsukuba, Ibaraki, 305-0044, Japan, [email protected]
Takayasu Ikegami
Affiliation:
First Research Group, National Institute for Research in Inorganic Materials, 1–1, Namiki, Tsukuba, Ibaraki, 305-0044, Japan
Hiroshi Yamamura
Affiliation:
Faculty of Engineering, Kanagawa University, 3–27–1, Rokkakubashi, Kanagawa, 221-8686, Japan
Get access

Abstract

M2O3-CeO2(M=Sm, La) system is one of the most interesting of fluorite oxides since the oxide ionic conductivity of it is higher than that of yttria-stabilized zirconia. In this study, the effective index for the improvement of ionic conductivity in CeO2 systems was defined using information regarding ionic radii and the level of oxygen vacancies from the perspective of crystallography. It is assumed that the M2O3 CeO2 based oxides approach the ideal fluorite structure for fast ionic conduction when the effective index increases toward 1. A small amount of alkali- or alkali-earth doped M2O3-CeO2 (M=Sm, La) solid solutions were prepared based on this effective index. The oxide ionic conductivity increased with an increase of this effective index. (La0.75Sr0.2Ba0.05)0.175 Ce0.825 O1.89 that had high effective index, showed high oxide ionic conductivity over the order of magnitude in comparison with 8mol% yttria-stabilized zirconia. Moreover, the oxygen partial pressure dependence of oxide ionic conductivity of M2O3-CeO2(M=Sm, La) solid solutions was improved by the increasing effective index. The utility of this effective index, for improvement of the electrical properties in fluorite CeO2 based materials, was investigated.

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Arai, H., J.Bull.Ceram.Soc.Jpn., 27(2) 100(1992).Google Scholar
2. Miura, N., Kurosawa, H., Hasei, M., Lu, G. and Yamazoe, N., Solid State Ionics, 86–88, 1069(1996).Google Scholar
3. Yamazoe, N. and Miura, N., Solid State Ionics, 86–88, 987(1996).Google Scholar
4. Stoukides, M. and Vayenas, C.G., J.Catal., 70, 137(1981).Google Scholar
5. Michaelis, J.N. and Vayenas, C.G., J.Catal., 85, 477 (1984).Google Scholar
6. Takehira, K., Catalysts & Catalysis, 39(5) 330(1997).Google Scholar
7. Minh, N.Q., J.Am.Ceram.Soc., 76(3) 563(1993).Google Scholar
8. Hibino, T. and Iwahara, H., Chem.Lett., 485(1994).Google Scholar
9. Sasaki, H., Otoshi, S., Suzuki, M., Sogi, T., Kajimura, A., Sagiura, N. and Ipponmatsu, M., Solid State Ionics, 72, 253(1994).Google Scholar
10. Gerhardt, R. and Nowick, A.S., J.Am.Ceram.Soc., 69(9) 641(1986).Google Scholar
11. Eguchi, K., kunisaki, T. and Arai, H., J.Am.Ceram.Soc., 69(11) C282(1986).Google Scholar
12. Yahiro, H., Baba, Y., Eguchi, K. and Arai, H., J.Electrochem.Soc., 135(8) 2077(1988).Google Scholar
13. Chiang, Y.M. Bimie, D. III and Kingery, W.D., Physical Ceramics,- Principlesfor Ceramics Science and Engineering-, (John Wiley & Sons, Inc. New York, 1996), p. 13.Google Scholar
14. AKilner, J., Solid State Ionics, 8, 201 (1983).Google Scholar
15. Shannon, R.D. and Prewitt, C.T., Acta Crystallogr., B25, 925 (1969).Google Scholar
16. Badwal, S.P.S. and Drennan, J., Materials Forum, 10, 177(1987).Google Scholar
17. Chiang, Y.M. Birnie, D. III and Kingery, W.D., Physical Ceramics,- Principles for Ceramics Science and Engineering-, (John Wiley & Sons, Inc. New York, 1996), p.136.Google Scholar
18. Takahashi, T. and Iwahara, H., Mat.Res.Bull., 13, 1447 (1978).Google Scholar