Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-23T15:07:39.639Z Has data issue: false hasContentIssue false

Impact of Material Crystallization Characteristics on the Switching Behavior of the Phase Change Memory Cell

Published online by Cambridge University Press:  01 February 2011

Thomas Gille
Affiliation:
[email protected], IMEC, SPDT, Kapeldreef 75, Leuven, N/A, 3001, Belgium
Ludovic Goux
Affiliation:
[email protected], IMEC, Kapeldreef 75, Leuven, N/A, 3001, Belgium
Judit Lisoni
Affiliation:
[email protected], IMEC, Kapeldreef 75, Leuven, N/A, 3001, Belgium
Kristin De Meyer
Affiliation:
[email protected], IMEC, Kapeldreef 75, Leuven, N/A, 3001, Belgium
Dirk J. Wouters
Affiliation:
[email protected], IMEC, Kapeldreef 75, Leuven, N/A, 3001, Belgium
Get access

Abstract

The impact of material crystallization characteristics on the switching behavior of phase change memory cells has been investigated using finite element simulation. Both a conventional vertical cell and a horizontal line cell have been analyzed, using the widely used Ge2Sb2Te5 (GST) which is a nucleation dominated material for the vertical cell, and Ag5.5In6.5Sb59Te29 (AIST) which is a growth dominated material for the horizontal cell. Nucleation and growth models were implemented for both materials. Both RESET and SET program cycles were simulated. From these simulations, it was shown that the crystallization models gave realistic results for switching voltages, currents and switching times for the two different cell types. It is found that for GST, both nucleation (at lower voltages) and growth (at higher voltages) can play an important role in the crystallization. However, for AIST, crystal growth from non-amorphized crystal regions dominated over nucleation for all program conditions. The high growth rate of AIST moreover is shown to allow much shorter SET times in the line cell compared to that of GST in the vertical cell.

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Lai, Stefan, IEDM Tech. Dig., pp. 255258, December 2003.Google Scholar
2. Kalb, J., Spaepen, F., Wuttig, M., J. Appl. Phys. 93 (5), 2389 (2003)Google Scholar
3. Lankhorst, M.H.R., Ketelaars, B.W.S.M.M., Wolters, R.A.M., Nature Materials, 4 (4), 2005.Google Scholar
4. Njoroge, W., Wuttig, M., J Appl Phys 90 (8), 3817 (2001)Google Scholar
5. Kim, Y.T. et al, Jap.J.Appl.Phys. 44 (4B), 2701 (2005)Google Scholar
6. Ielmini, D. et al, IEEE Elec. Dev.Lett., 25, 507 (2004)Google Scholar
7. Yi, J. H. et al, IEDM Tech. Dig., pp. 901904, December 2003.Google Scholar
8. Senkader, S., Wright, C.D., J. Appl. Phys. 95 (2), 504 (2004)Google Scholar
9. Kelton, K. F., Solid State Phys. 45, 75 (1991)Google Scholar
10. Kalb, J., Spaepen, F., Wuttig, M., J. Appl. Phys. 98 (5), 5491 (2005)Google Scholar
11. Wei, J., Gan, F., Thin Solid Films 441 (2003) 292297 Google Scholar
12.G. Wicker, PhD thesis, Wayne University, 1996 Google Scholar