Hostname: page-component-586b7cd67f-2plfb Total loading time: 0 Render date: 2024-11-29T07:46:55.493Z Has data issue: false hasContentIssue false
  • English
  • Français

Hydrogen-doped Bulk Metallic Glasses as High Damping Material

Published online by Cambridge University Press:  17 March 2011

Teruaki Yagi ,
Rikiya Oguro ,
Ryuji Tamura  and
Shin Takeuchi
Teruaki Yagi
Affiliation:
Department of Materials Science and Technology, Science University of Tokyo, Noda, Chiba 278-8510, Japan
Rikiya Oguro
Affiliation:
Department of Materials Science and Technology, Science University of Tokyo, Noda, Chiba 278-8510, Japan
Ryuji Tamura
Affiliation:
Department of Materials Science and Technology, Science University of Tokyo, Noda, Chiba 278-8510, Japan
Shin Takeuchi
Affiliation:
Department of Materials Science and Technology, Science University of Tokyo, Noda, Chiba 278-8510, Japan
Get access

Abstract

Bulk metallic glasses have extremely high strength and high ductility and are quite useful as the structural material. Many of bulk metallic glasses are based on Zr, Ti and Pd; these elements have a high affinity with hydrogen and hence the bulk metallic glasses can contain a large amount of hydrogen atoms. It is known that hydrogenized amorphous metals, as well as hydrogenized metallic crystals, exhibit Snoek-type relaxation, and hence metallic glasses containing a high density of hydrogen can have a high internal friction.

In the present experiments, internal friction measurements have been performed for bulk metallic glasses doped with a variety of hydrogen concentrations. It is shown that the peak value of the internal friction reaches the order of 10-2 in Zr-based bulk metallic glasses which have the fracture strength as high as 1.5 GPa. Thus, hydrogen-doped bulk metallic glasses can be used as the high-strength, high-damping material.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 644: Symposium L – Supercooled Liquid, Bulk Glassy and Nanocrystalline State of Alloys , 2000 , L11.10
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Inoue, A., Bulk Amorphous Alloys (Trans Tech Pub., 1998).Google Scholar
2.Harris, J. H., Curtin, W. A. and Tenhover, M. A., Phys. Rev., B36, 5784 (1987).Google Scholar
3.E.g.: Stolz, U., Weller, M. and Kirchheim, R., Scripta metall., 20, 1361 (1986).Google Scholar
4.Inoue, A., Mater. Trans. JIM, 36, 866 (1995).Google Scholar
5.Inoue, A. and Zhang, T., Mater. Sci. Eng., A226–228, 393 (1997).Google Scholar
6.Berry, B. S., Pritchet, W. C. and Tsuei, C. C., Phys. Rev. Lett., 41, 410 (1978).Google Scholar
7.Stolz, U., Weller, M. and Kirchheim, R., Scripta metall., 20, 2259 (1986).Google Scholar
8.Mizubayashi, H., Katoh, Y. and Okuda, S., Phys. Stat. Sol., (a)104, 469 (1987).Google Scholar
9.Mizubayashi, H., Agari, H. and Okuda, S., Phys. Stat. Sol., (a)122, 221 (1990).Google Scholar
10.Mizubayashi, H., Naruse, T. and Okuda, S., J. Less-Common Metals, 172–174, 908 (1991).Google Scholar
11.Matsumoto, M., Mizubayashi, H. and Okuda, S., Acta Metall. Mater., 43, 1109 (1995).Google Scholar
12.Harris, J. H., Curtin, W. A. and Tenhover, M. A., Phys. Rev., B36, 5784 (1987).Google Scholar
13.Mizubayashi, H., private communications.Google Scholar