Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-29T09:36:13.170Z Has data issue: false hasContentIssue false
  • English
  • Français

Hydrogen Bond Configuration Changes in PECVD Silicon Nitride Films During RTA

Published online by Cambridge University Press:  15 February 2011

S. S. He  and
V. L. Shannon
S. S. He
Affiliation:
Sharp Microelectronics Technology Inc., 5700 NW Pacific Rim Blvd., Camas, WA 98607
V. L. Shannon
Affiliation:
Sharp Microelectronics Technology Inc., 5700 NW Pacific Rim Blvd., Camas, WA 98607
Get access

Abstract

PECVD silicon rich (x<4/3) and nitrogen rich (x>4/3) silicon nitride films have been deposited using a silane, ammonia, and nitrogen mixture at 400°C in a dual frequency parallel plate reactor. From FTIR measurements, most of the bonded hydrogen was observed to be present as N-H in the nitrogen rich films and as Si-H in the silicon rich films. In this study, the movement of hydrogen in the various nitride films as a result of Rapid Thermal Annealing (RTA) in N2 for 30 seconds has been investigated. While the intensity of the N-H stretching band was always found to decrease from that measured for the as-deposited film, the intensity of the Si-H stretching band was observed to increase for anneal temperatures up to 650°C. During the anneal process some hydrogen effusion takes place and some of hydrogen changes its bonding to silicon atoms from previous nitrogen atoms in the film. Consistent with the FTIR results, Hydrogen Forward Scattering (HFS), shows that only a small amount of hydrogen effuses from the silicon nitride film as a result of the RTA process below 650°C.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 377: Symposium A – Amorphous Silicon Technology 1995 , 1995 , 337
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Susuki, K., Amorphous and Microcrystalline Semiconductor Devices, ed. Kanicki, J., Boston, : (Artech House, 1991), p.77.Google Scholar
2. Lewis, A. J., Connell, G. A. N., Paul, W., Pawlik, J. R. and Temkin, R. J., Tetrahedrally Bonded Semiconductors, ed. Brodsky, M. H. (Springer, Berlin, 1974).Google Scholar
3. He, S. S., Stephens, D. J., Lucovsky, G. and Hamaker, R. W., MRS V. 284, p.414–418.Google Scholar
4. He, S. S. and Lucovsky, G., MRS V. 345, p.53.Google Scholar
5. Knolle, W. R. and Osenbach, J. W., J. Appl. Phys. 58, 1248 (1985).Google Scholar
6. Robertson, J., Phil. Mag. B 63, 47 (1991).Google Scholar
7. Stein, H. J., Wells, V. A., Hampy, R. E., J. Electrochem. Soc. 126, 1750, (1979).Google Scholar