Hostname: page-component-586b7cd67f-rdxmf Total loading time: 0 Render date: 2024-11-29T08:13:55.387Z Has data issue: false hasContentIssue false
  • English
  • Français

High-Temperature Materials Based on Quaternary Ir-Nb-Ni-Al Alloys

Published online by Cambridge University Press:  21 March 2011

X. Yu ,
Y. Yamabe-Mitarai ,
Y. Ro ,
S. Nakaza  and
H. Harada
X. Yu
Affiliation:
High-Temperature Materials 21 Project, National Research Institute for Metals Sengen 1–2–1, Tsukuba, Ibaraki 305–0047, Japan
Y. Yamabe-Mitarai
Affiliation:
High-Temperature Materials 21 Project, National Research Institute for Metals Sengen 1–2–1, Tsukuba, Ibaraki 305–0047, Japan
Y. Ro
Affiliation:
High-Temperature Materials 21 Project, National Research Institute for Metals Sengen 1–2–1, Tsukuba, Ibaraki 305–0047, Japan
S. Nakaza
Affiliation:
High-Temperature Materials 21 Project, National Research Institute for Metals Sengen 1–2–1, Tsukuba, Ibaraki 305–0047, Japan
H. Harada
Affiliation:
High-Temperature Materials 21 Project, National Research Institute for Metals Sengen 1–2–1, Tsukuba, Ibaraki 305–0047, Japan
Get access

Abstract

A novel method to develop new quaternary alloys with an fcc/L12 coherent structure is proposed. This paper reviews the development of quaternary Ir-Nb-Ni-Al alloys. The microstructure, lattice misfit, and compressive 0.2% flow stress of 15 kinds of alloys were investigated systematically. Two kinds of coherent structures, fcc/L12-Ir3Nb and fcc/ L12-Ni3Al, were observed in most alloys. Two two-phase structures, fcc+L12-Ir3Nb and fcc+L12-Ni3Al, were observed in Ir-rich and Ni-rich regions, respectively. The lattice misfits of quaternary Ir-Nb-Ni-Al alloys were higher than those of Ni- or Ir-base binary alloys. The compressive 0.2% flow stresses of quaternary alloys increased dramatically compared with those of Ni-base superalloys. The quaternary alloys located in the Ir-rich region were not only had higher strength but also better ductility than Ir-base binary alloys. The potential use of quaternary alloys is discussed.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 646 , 2000 , N3.7.1
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Yamabe-Mitarai, Y., Ro, Y., Maruko, T., and Harada, H.: Metall. Trans. A, 29A, 537 (1998)10.1007/s11661-998-0135-9Google Scholar
2. Yamabe-Mitarai, Y., Ro, Y., Maruko, T., Yokokawa, T., and Harada, H.: Structural Intermetallics 1997, edited by Nathal, M. V. et al., The Minerals, Metals, & Materials Society, Sept.21–25, 1997, Champion, Pennsylvania, USA, 1997, p.805–813.Google Scholar
3. Yamabe-Mitarai, Y., Gu, Y., Ro, Y., Nakazawa, S., Maruko, T., and Harada, H.: Scripta Metall. Mater., 41 (3), 305 (1999)10.1016/S1359-6462(99)00166-9Google Scholar
4. Gu, Y. F., Yamabe-Mitarai, Y., Ro, Y., Yokokawa, T., and Harada, H.: Metall. Trans. A, 30A, 2629 (1999).10.1007/s11661-999-0303-6Google Scholar
5. Yu, X. H., Yamabe-Mitarai, Y., Ro, Y., and Harada, H.: Metall. Trans. A, 31A, 173 (2000)10.1007/s11661-000-0063-9Google Scholar
6. Yu, X. H., Yamabe-Mitarai, Y., Ro, Y., and Harada, H.: Key Engineering Materials, 171–174, 677 (2000)Google Scholar
7. Yu, X. H., Yamabe-Mitarai, Y., Yokokawa, T., Osawa, M., Ro, Y., and Harada, H.: Iridium, Ohriner, E. K., Lanam, R. D., Panfilov, P., and Harada, H., eds., TMS, Nashville, TN, 2000, pp. 61–69.Google Scholar
8. Yu, X. H., Yamabe-Mitarai, Y., and Harada, H.: Scripta Mater., 43, 671(2000).10.1016/S1359-6462(00)00459-0Google Scholar
9. Brown, W. F. Jr, Mindin, H., and Ho, C. Y.: Aerospace Structural Metals Handbook, CINDAS/Purdue University, 1992, 5, p. 4218.Google Scholar