Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-27T02:00:07.372Z Has data issue: false hasContentIssue false
  • English
  • Français

High Throughput Electrochemical Method for Contact Optimization in Printed Rectifying Diodes

Published online by Cambridge University Press:  24 April 2014

Petri S. Heljo ,
Himadri S. Majumdar  and
Donald Lupo
Petri S. Heljo
Affiliation:
Tampere University of Technology, Department of Electronics and Communications Engineering, Printed and Organic Electronics Group, P.O. Box 692, 33101 Tampere, Finland
Himadri S. Majumdar
Affiliation:
VTT Technical Research Centre of Finland, Tietotie 3, 02150 Espoo, Finland
Donald Lupo
Affiliation:
Tampere University of Technology, Department of Electronics and Communications Engineering, Printed and Organic Electronics Group, P.O. Box 692, 33101 Tampere, Finland
Get access

Abstract

We report a low cost and high throughput electrochemical anodic oxidation method to enhance the metal-semiconductor contact between a silver electrode and an organic semiconductor in a rectifying diode application. The oxidized layer enhances the contact properties, leading to better device performance. Three different anodic oxide thicknesses were used in the study. Current-voltage and AC rectification measurements were used to characterize the printed devices. The DC output voltage of the half-wave rectifier increased consistently as a function of the oxide thickness. This procedure points toward a cost-effective way to optimize printed organic devices.

Keywords

devicesorganicoxide
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1628: Symposium M – Large-Area Processing and Patterning for Active Optical and Electronic Devices , 2014 , mrsf13-1628-m05-05
Copyright
Copyright © Materials Research Society 2014 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Kwon, J., Seol, Y. G., Lee, N.-E., Chung, I., Study on Ohmic contact improvement of organic Schottky diode utilizing self-assembled monolayer and PEDOT: PSS layers, J. Vac. Sci. Technol. A, 28 (2010) 879.CrossRefGoogle Scholar
Lü, Z. et al. ., Ohmic contact and space-charge-limited current in molybdenum oxide modified devices, Physica E, 41 (2009) 1806–1809.CrossRefGoogle Scholar
de Bruyn, P., Moet, D. J. D., Blom, P. W. M., All-solution processed polymer light-emitting diodes with air stable metal-oxide electrodes, Org. Eletron., 13 (2012) 1023–1030.CrossRefGoogle Scholar
Ida, Y. et al. ., Direct Electrodeposition of 1.46 eV Bandgap Silver(I) Oxide Semiconductor Films by Electrogenerated Acid, Chem. Mater., 20 (2008) 1254–1256.CrossRefGoogle Scholar
Nowotny, M. K., Bak, T., Nowotny, J., Sorrell, C. C., Titanium vacancies in nonstoichiometric TiO2 single crystal, Phys. Stat. Sol., 242 (2005) R88–R90.CrossRefGoogle Scholar
Chen, C.-W. et al. . Top-emitting organic light-emitting devices using surface-modified Ag anode, Appl. Phys. Lett., 83 (2003) 25.CrossRefGoogle Scholar
Lilja, K.E., Majumdar, H.S., Petterson, F.S., Österbacka, R., Joutsenoja, T., Enhanced Performance of Printed Organic Diodes Using a Thin Interfacial Barrier Layer, ACS Appl. Mater. Interfaces, 3 (2011) 7–10.CrossRefGoogle ScholarPubMed
de Rooij, A., The Oxidation of Silver by Atomic Oxygen, ESA Journal, 13 (1989) 363–382.Google Scholar
Lützenkirchen-Hecht, D., Strehblow, H.-H., The anodic oxidation of silver in 1 M NaOH: electrochemistry, ex situ XPS and in situ X-ray absorption spectroscopy, Surf. Interface Anal., 38 (2006) 686–690.CrossRefGoogle Scholar
Rose, A., Space-Charge-Limited Currents in solids, Phys. Rev. 97 (1955) 1538–1544.CrossRefGoogle Scholar
Lampert, M. A., Simplified Theory of Space-Charge-Limited Currents in an Insulator with Traps, Phys. Rev. 903 (1956) 1648–1656.CrossRefGoogle Scholar
Tian, Y. T. et al. ., Alumina nanowire arrays standing on a porous anodic alumina membrane, Nanotechnology, 15 (2004) 189–191.CrossRefGoogle Scholar
Mor, G. K., Varghese, O. K., Pauloise, M., Shankar, K., Grimes, C. A., A review on highly ordered, vertically oriented TiO2 nanotube arrays: Fabrication, material properties, and solar energy applications, Sol. Energ. Mat. Sol. Cells, 90 (2006) 2011–2075.CrossRefGoogle Scholar
Novikov, S. V., Rough Electrode Surface: Effect on Charge Carrier Injection and Transport in Organic Devices, Macromol. Symp., 212 (2004) 191–200.CrossRefGoogle Scholar