Hostname: page-component-6bf8c574d5-t27h7 Total loading time: 0 Render date: 2025-02-20T14:18:10.217Z Has data issue: false hasContentIssue false
  • English
  • Français

High Temperature Fatigue Properties of Silicon Nitride in Nitrogen Atmosphere

Published online by Cambridge University Press:  25 February 2011

Yasuhiro Shigegaki ,
Takashi Inamura ,
Akihiko Suzuki  and
Tadashi Sasa
Yasuhiro Shigegaki
Affiliation:
Ishikawajima-Harima Heavy Industries Co., Ltd., Research Institute, 3–1–15 Toyosu, Koto-ku, Tokyo 135, Japan
Takashi Inamura
Affiliation:
Ishikawajima-Harima Heavy Industries Co., Ltd., Research Institute, 3–1–15 Toyosu, Koto-ku, Tokyo 135, Japan
Akihiko Suzuki
Affiliation:
Ishikawajima-Harima Heavy Industries Co., Ltd., Research Institute, 3–1–15 Toyosu, Koto-ku, Tokyo 135, Japan
Tadashi Sasa
Affiliation:
Ishikawajima-Harima Heavy Industries Co., Ltd., Research Institute, 3–1–15 Toyosu, Koto-ku, Tokyo 135, Japan
Get access

Abstract

Cyclic and static fatigue properties of pressure-less sintered silicon nitride were evaluated at 1000° C in air and in nitrogen using four-point bending mode. The data of cyclic fatigue tests or static fatigue tests and the morphology of the fractured surfaces in nitrogen were compared with those in air. The cyclic fatigue behavior was remarkably influenced by the atmosphere, while the static fatigue was less influenced. Crack healing effect due to the oxidation around the crack are thought to be the most probable mechanism to affect the cyclic fatigue rate in air.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 287: Symposium K – Silicon Nitride Ceramics–Scientific and Technological Advances , 1992 , 461
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Makino, T., Nakasuji, Y., Masuda, M. and Matsui, M., in Proceedingas of the 1st International Symoosium on the Science of Enoineerina Ceramics, edited by Kimura, S. and Niihara, K. (Jap. Ceram.Soc., Koda,Japan,1991), pp.189–194.Google Scholar
2. Tressler, R.E., Jia, N.Y., Zheng, Z. and Takahashi, H., ibid, pp.167–176.Google Scholar
3. Biest, O.Van der and Weberin, C. Ceramic Transactions-Vol.10, Corrosion and Corrosive Degradation of Ceramics, edited by Tressler, R.E. and McNallan, M. (Am.Ceram.Soc., Westerville, OH,1990), pp.129–139.Google Scholar
4. Easler, T.E., Bradt, R.C. Tressler, R.E.,J.Am.Ceram.Soc. 64,12, 731(1981)Google Scholar
5. Choi, S.R., Tikare, V. and Pawlik, R.,Ceram.Eng.Sci.Proc. 12,9-10, 2190(1991)Google Scholar