Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-27T02:37:29.182Z Has data issue: false hasContentIssue false

High Temperature Dielectric Properties of Sol-Gel Derived Thick PZT thin Films with Different Zr/Ti Atom Ratios

Published online by Cambridge University Press:  17 March 2011

Jinrong Cheng
Affiliation:
Material Research Laboratory, The Pennsylvania State University University Park, PA 16802
Wenyi Zhu
Affiliation:
Material Research Laboratory, The Pennsylvania State University University Park, PA 16802
Nan Li
Affiliation:
Material Research Laboratory, The Pennsylvania State University University Park, PA 16802
L.Eric Cross
Affiliation:
Material Research Laboratory, The Pennsylvania State University University Park, PA 16802
Get access

Abstract

PZT thin films of different thicknesses and Zr/Ti ratios of 60/40, 52/48 and 45/55 were coated onto platinized silicon substrates by using 2 methoxyethanol (2-MOE) based sol-gel spinon technique and crystallized with a rapid thermal annealing (RTA) process. XRD analysis revealed that thin PZT films exhibit random texture, while the thicker ones exhibit (100) texture, which was independent of composition. Dielectric constants and dissipation factors of PZT thin films were measured at elevated temperatures and as a function of frequency. For films with a thickness of ∼ 4 μm, the Curie points are at 350, 375 and 422°C for Zr/Ti ratios of 60/40, 52/48 and 45/55, respectively. All these films exhibit a high remnant polarization. A remnant polarization of 35 μC/cm2 had been achieved for the 60/40 films. No enhancement of the dielectric constant was observed in films with a composition close to MPB. The higher dielectric constant observed in films with the highest Zr content was explained by the concept of domain engineering.

Type
Research Article
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Jaffe, B., Roth, R.S., and Marzullo, S., J. Res. Natl. Bur. Stand. 55, 239 (1955).Google Scholar
2. Jaffe, B., Cook, W.R. Jr., and Jaffe, H., Piezoelectric Ceramics (Academic, New York, 1971), pp.135148.Google Scholar
3. Berlincourt, D.A., Cmolik, C., and Jaffe, H., Pro. IRE 48, 220 (1960).Google Scholar
4. Tuttle, B.A., Voigt, J.A., Goodnow, D.C., Rodgeres, S.M., J.Am.Ceram.Soc., 76, 1537 (1993).Google Scholar
5. Chen, H.D., Udayakumar, K.R., Gaskey, C.J., Cross, L.E., Appl.Phys.Lett., 67, 3411 (1995).Google Scholar
6. Dubois, M., Muralt, P., Taylor, D.V., Hiboux, S., Integrated Ferroelectrics, 22, 535 (1998).Google Scholar
7. Cheng, Jinrong, Meng, Zhongyan, Proc.9th CIMTEC-World Ceramics Congress and Forum on New Materials, in Advances in Sci. and Tech. 25, 61 (1999).Google Scholar
8. Cheng, Jinrong, Meng, Zhongyan, J.Matter.Sci.Lett.,19, 1945 (2000).Google Scholar
9. Brooks, K.G., Reaney, I.M., Bursill, L., Setter, N., J.Matter.Res., 9, 2540 (1994).Google Scholar
10. Ohring, M., The Materials Science of Thin Films (Academic, London), (1992).Google Scholar
11. Amin, A., Newnham, R.E., Cross, L.E., Phys.Rev. B34, 1595 (1986).Google Scholar
12. Samsonov, G.V., The Oxide Handbook, (IFI/Plenum Data Company, New York), (1982).Google Scholar
13. Oh, S. Hoon and Jang, Hyun M., Appl.Phys.Lett., 72, 1457 (1998).Google Scholar
14. Cheng, Z., Bharti, V., Xu, T., Wang, S., Zhang, Q.M., Ramotowski, T., Tito, F., Ting, R., J.Appl.Phys., 86, 2213 (1999).Google Scholar
15. Cheng, Jinrong, Meng, Zhongyan, Thin Solid Films, 385, 5 (2001).Google Scholar