Hostname: page-component-586b7cd67f-t8hqh Total loading time: 0 Render date: 2024-11-25T18:00:04.296Z Has data issue: false hasContentIssue false
  • English
  • Français

High Reverse Breakdown a-C:H/Si Diodes Manufactured by rf-PECVD

Published online by Cambridge University Press:  10 February 2011

Shashi Paul  and
F.J Clough
Shashi Paul
Affiliation:
Emerging Technologies Research Centre De Montfort University, Hawthorn Building, The Gateway, Leicester LE I 9BH, UK
F.J Clough
Affiliation:
Emerging Technologies Research Centre De Montfort University, Hawthorn Building, The Gateway, Leicester LE I 9BH, UK
Get access

Abstract

Thin films of hydrogenated amorphous carbon ( a-C:H ) deposited by radio frequency plasma-enhanced chemical vapour deposition (rf-PECVD) have been studied for various applications. An interesting property of these films is their high breakdown strength ( 107 Vcm−1 ). This property of a-C:H can be exploited in high breakdown heterostructure diodes or as passivation layers and insulator layers in MIS devices. Reports on the applications of a-C:H/Si diodes exist in the literature. Diodes in which the a-C:H films have been deposited by rf-PECVD, have been reported only once. In this article the diodes produced reportedly failed to exhibit reproducible I-V characteristics under high voltage stress. We have investigated the process dependence of structural and electrical properties of rf-PECVD a-C:H films deposited at room temperature from a CH4/Ar gas mixture (at a pressure of 100 mTorr) using a capacitively coupled rf-PECVD. We observe a clear correlation between the dc-self bias and the rectification ratio of a-C:H/Si heterojunction diodes. Optimised diodes show rectification ratios upto 104 and a stable reverse breakdown voltage, typically around 850 V. I-V and C-V measurements show no evidence of hystersis. Scanning Electron Microscopy was carried out to determine the quality of the films deposited. Micro-Raman analysis was used to estimate the ID/IG ratio in the films deposited under different dc-self bias.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 593: Symposium U – Amorphous & Nanostructured Carbon , 1999 , 427
Copyright
Copyright © Materials Research Society 2000

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Robertson, J., Adv. Phys. 35 (1986) 317.Google Scholar
2. Clough, F.J., Kleinsorge, B., Milne, W.I., Robertson, J., Amaratunga, G.A.J., Roy, B.N., Electron. Lett. 32 (1996) 498–499.Google Scholar
3. Egret, S., Robertson, J., Milne, W.I., Clough, F.J., Diamond Relat. Mater., 6 (1997) 879–883.Google Scholar
4. Paul, S and Clough, F.J, Diamond Relat. Mater., 7 (1998) 1734–1738.Google Scholar
5. Kohler, K., Cobum, J.W., Home, D.E, Kay, E. and Keller, J.H, J. Appl. Phys. 57, 59 (1985).Google Scholar
6. Ohta, E., Kimura, Y., Kondo, H., Takahashi, M., Kameyama, K., Yamada, K. and Fujimura, I., 22nd Int. Conf. Sol. Stat. Devices and Materials (SSDM), 589 (1990).Google Scholar
7. Amaratunga, G., Milne, W., Putnis, A., IEEE EDL 11 (1990) 33.Google Scholar
8. Hwang, S.B., Fang, Y.K, Chen, K.H. Liu, C.R, and Kuo, L.C, Electronics Letters, 27 (1991) 2043 Google Scholar