Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-27T02:04:54.946Z Has data issue: false hasContentIssue false
  • English
  • Français

High Nitrogen Concentration in Fe-Cr-Ni Alloys

Published online by Cambridge University Press:  15 February 2011

James C. Rawers ,
Nev A. Gokcen  and
Robert D. Pehlke
James C. Rawers
Affiliation:
U.S. Bureau of Mines, 1450 Queen Avenue, SW, Albany OR 97321.
Nev A. Gokcen
Affiliation:
U.S. Bureau of Mines, 1450 Queen Avenue, SW, Albany OR 97321.
Robert D. Pehlke
Affiliation:
University of Michigan, Dept. Materials Science, Univ. Michigan, Ann Arbor MI, 48104.
Get access

Abstract

Increasing the nitrogen concentration in iron and iron alloys significantly improves their mechanical properties. A recent technique for melting in a hot-isostatic pressure furnace using nitrogen as the pressurizing gas has been developed by U.S. Bureau of Mines researchers for making massive nitrogen additions to iron (up to 1.6 weight percent nitrogen) and iron-chromium-nickel alloys (up to 6.6 weight percent nitrogen). The total nitrogen concentration measured at atmospheric pressure and room temperature was determined to be the equilibrium nitrogen concentration in the molten alloy. Statistical correlations were derived to explain the effects of melt pressure and alloy composition on the resulting nitrogen concentration. Nitrogen concentrations measured in solidified alloys made by high pressure melting techniques at lower pressures are consistent with previous published data. Computer generated phase diagrams for high nitrogen-chromium concentrations are also consistent with nitride microstructure observed after high-pressure melting. Extension of existing atmospheric nitrogen concentration data to higher pressure nitrogen concentrations shows Sievert's law (nitrogen concentration is proportional to the square root of the nitrogen melt pressure) to be valid for pure iron. However, substantial deviations from Sievert's law are observed for higher alloy compositions. Statistical fits of thermodynamic concentration data to the high-pressure melt nitrogen data requires evaluating element concentration terms, interaction effect terms, pressure terms, and pressure-composition effects terms. Examination of the nitrogen concentration data suggests several methods of correlation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 251: Symposium S – Pressure Effects on Materials Processing and Design , 1991 , 71
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Pehlke, R.D. and Elliot, J.F., Trans Metall Soc AIME, 218, 1088 (1960).Google Scholar
2. Blossy, R.G. and Pehlke, R.D., Trans Metall Soc AIME, 242, 2457 (1968).Google Scholar
3. Small, W.M. and Pehlke, R.D., Trans Metall Soc AIME, 242, 2501 (1968).Google Scholar
4. Shahapurkar, D.S. and Small, W.M., Met Trans B, 18B, 225 (1987).Google Scholar
5. Pomarin, Y.M. and Grigorenko, G.M., ”HIGH NITROGEN STEEL-90” conf. 10–12 Oct. 1990, Aachen, Germany, eds. Stein, G. and Witulski, H., Verlag Stahleisen mbH, Dusseldorf, ISBN 3-514-00452-8, 1992, 27 Google Scholar
6. Small, W.M., Scripta Met & Mat, 24, 1695 (1990).Google Scholar
7. Small, W.M., Scripta Met & Mat, 24, 107 (1990).CrossRefGoogle Scholar
8. Masumoto, T., Naka, M., & Imai, Y., J Japan Inst Metals, 34 (2), 195 (1970).Google Scholar
9. Shaposhinkov, N.G., Surovoi, Y.N., & Kas'yanov, Y.I., Russ J Phys. Chem., 64 (1), 110 (1990).Google Scholar
10. Stein, G., Menzel, J., and Dorr, H., ”HIGH NITROGEN STEEL-88” conf. 18–20 May 1988, Lille, France, eds. Foct, J. and Hendry, A., Institute of Metals, publ London, ISBN 0-901462-45-4, 1988, 32.Google Scholar
11. Rawers, J.C. & Rawers, L.J., J. Mat. Sci. Letts.,10, 1101 (1991).CrossRefGoogle Scholar
12. Rawers, J. and Oldham, L., J. Mat. Sci. Letts., 10, 858 (1991).Google Scholar
13. Rawers, J., Dunning, J., and Reed, R., ”HIGH NITROGEN STEEL-90” conf. 10–12 Oct. 1990, Aachen, Germany, eds. Stein, G. and Witulski, H., Verlag Stahleisen mbH, Dusseldorf, ISBN 3-514-00452-8, 1990, 63.Google Scholar
14. Rawers, J., Brown, R., & McCune, R., Hi Temp-Hi Press, 22, 459 (1990).Google Scholar
15. Gokcen, N., ”STATISTICAL THERMODYNAMICS of ALLOYS,” Plenum Press London, ISBN 0-306-42177-1, 1986.CrossRefGoogle Scholar
16. Perrot, P. and Foct, J., ”HIGH NITROGEN STEEL-90” conf. 10–12 Oct. 1990, Aachen,Germany, eds. Stein, G. and Witulski, H., Verlag Stahleisen mbH, Dusseldorf, ISBN 3-514-00452-8, 1990, 32.Google Scholar
17. Frisk, K., Met Trans A, 21A, 2477 (1990).Google Scholar
18. Frisk, K., Z. Metallkde, 82(2), 117 (1991).Google Scholar
19. Frisk, K. and Hillert, M., ”HIGH NITROGEN STEEL-88” conf. 18–20 May 1988, Lille, France, eds. Foct, J. & Hendry, A., Institute of Metals, publ. London, ISBN 0-901462-45-4, 1988, 1.Google Scholar
20. Kikuchi, M., Kajihara, M., and Frisk, K., ”HIGH NITROGEN STEEL-88” conf. 18–20 May 1988, Lille, France, eds. Foct, J. and Hendry, A., Institute of Metals, publ London, ISBN 0-901462-45-4, 1988, 63.Google Scholar
21. Lee, J.Y. and Parlee, N., High Temp Sci, 4, 147 (1972).Google Scholar
22. Turnock, P.H. and Pehlke, R.D., Trans Metall Soc AIME. 236, 1540 (1966).Google Scholar
23. Wriedt, H.A., Gokcen, N.A., and Nafziger, R.H., Bulletin Alloy Phase Diagram, 8 (4), 355 (1987).Google Scholar
24. Grujicic, M., Nilsson, J-O., Owen, W.E., and Thorvaldson, T., ”HIGH NITROGEN STEEL-88” conf. 18–20 May 1988, Lille, France, eds. Foct, J. and Hendry, A., Institute of Metals, publ. London, ISBN 0-901462-45-4, 1995, 151.Google Scholar
25. Jack, K.H., ”HIGH NITROGEN STEEL-88” conf. 18–20 May 1988, Lille, France, eds. Foct, J. and Hendry, A., Institute of Metals, publ. London, ISBN 0-901462-45-4, 1988, 117.Google Scholar
26. Hetmanszyk, M., Sommers, M., and Mittemeijer., E. “HIGH NITROGEN STEEL-88” conf. 18–20 May 1988, Lille, France, eds. Foct, J. and Hendry, A., Institute of Metals, publ. London, ISBN 0-901462-45-4, 190, 108.Google Scholar
27. Negoda, G., Grigorenko, G., Latash, Y., and Torkhov, G., ”HIGH NITROGEN STEEL-88” conf. 18–20 May 1988, Lille, France. eds. Foct, J. and Hendry, A., Institute of Metals, publ. London, ISBN 0-901462-45-4, 1988 53.Google Scholar
28. Wada, H. and Pehlke, R.D., Metall. Trans B, 8B, 675 (1977).CrossRefGoogle Scholar