Hostname: page-component-586b7cd67f-g8jcs Total loading time: 0 Render date: 2024-11-25T15:40:49.885Z Has data issue: false hasContentIssue false
  • English
  • Français

Growth, Structure, and Mechanical Properties of Pulsed Laser Deposited TiN/TiB2 Microlaminates

Published online by Cambridge University Press:  15 February 2011

Ashok Kumar ,
R. B. Inturi ,
U. Ekanayake ,
H. L. Chan  and
J. A. Barnard
Ashok Kumar
Affiliation:
Department of Electrical Engineering, University of South Alabama, Mobile, AL 36608
R. B. Inturi
Affiliation:
Department of Metallurgical and Materials Engineering, University of Alabama Tuscaloosa, AL 35487
U. Ekanayake
Affiliation:
Department of Electrical Engineering, University of South Alabama, Mobile, AL 36608
H. L. Chan
Affiliation:
Department of Electrical Engineering, University of South Alabama, Mobile, AL 36608
J. A. Barnard
Affiliation:
Department of Metallurgical and Materials Engineering, University of Alabama Tuscaloosa, AL 35487
Get access

Abstract

Hard coatings of TiN and TiB2 have many interesting properties such as high thermal and electrical conductivity, high melting point, good thermodynamic stability and combination of these properties make them an interesting prospect for a wide range of tribological and electronic applications. It is understood that artificial multilayer structures have shown anamolously high hardness and modulii making them likely candidate for future protective coatings. Single layer of TiN, TiB2, and TiB2/TiN microlaminates coatings with varying thickness have been deposited on Si (100) and oxidized Si(111) substrates by in-situ pulsed laser deposition method. These films are deposited at 10 Hz repetition rate of excimer laser (λ = 248 nm). Our preliminary results show that elastic modulii and hardness values of multilayered coatings are superior than monolithic coatings of either of the two constituent materials. The coatings have been characterized by X-ray diffiractometer and AFM techniques. Detailed results have been presented to correlate the effect of microlaminate thickness on the mechanical properties.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 436: Symposium CC – Thin Films Stresses and Mechanical Properties VI , 1996 , 65
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Inturi, R. B., Kumar, Ashok, Ekanayake, U., Shu, N. and Barnard, J. A. “MRS Fall Meeting” Boston, MA (1995) in pressGoogle Scholar
[2] Kumar, Ashok, Inturi, R- B., Vohra, Y., Ekanayake, U., Shu, N., Kjendal, D., Wattuhewa, G. and Barnard, J. A. “MRS Fall Meeting” Boston, MA (1995) in pressGoogle Scholar
[3] Lhermitte-Sibirre, I., Colmet, R., Naslain, R., Desmaison, J. and Gladel, G. “Thin Solid Films”, 138 (1986) p. 221 Google Scholar
[4] Holleck, H. and Schultz, H., ”Surface Coating and Technology”, 36 (1988) p. 707 Google Scholar
[5] Holleck, H. and Scultz, H., ”Thin Solid Films” (1987) p. 11 Google Scholar
[6] Inturi, R. B., Chen, J. and Barnard, J. A. “Proceedings of the Tenth Internation Conference on Composite Materials”, Vol. IV (1995) p. 697 Google Scholar
[7] Inturi, R. B., Barnard, J. A., Chinnmulgund, M. and Jarratt, J. D. “MRS Proceeding”, Vol.308 (1993) p. 719 Google Scholar
[8] Oliver, W. C. and Pharr, G. M., ”J. Mater. Res.”, 7 (1992) p. 1564 Google Scholar