Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-27T03:31:39.231Z Has data issue: false hasContentIssue false

Growth and Characterization of InGaNAs Quaternary Alloys for the Fabrication of Long Wavelength MSM Photodetectors on GaAs Substrates

Published online by Cambridge University Press:  01 February 2011

Erle Higgins
Affiliation:
[email protected], Communications Research Centre Canada, Optoelectronic Materials and Components, 3701 Carling Ave. Box 11490 Station H, Ottawa, Ontario, K2h 8S2, Canada
Julian Noad
Affiliation:
[email protected], Communications Research Centre Canada, Canada
Francois Gouin
Affiliation:
[email protected], Communications Research Centre Canada, Canada
David Coulas
Affiliation:
[email protected], Communications Research Centre Canada, Canada
Get access

Abstract

In this paper, the optical and electrical properties of both as-grown and annealed thick InxGa1−xNyAs1−y layers grown by metal organic chemical vapour deposition (MOCVD) are presented. Through careful control of the trimetylyindium (TMIn), dimetylyhydrazine (DMHy), trimethylgallium (TMGa) and arsine (AsH3) precursors, lattice matching conditions were achieved for epitaxial layers containing up to 3% nitrogen (0≤y≤0.03) and 11% indium (0≤x≤0.11) with bandgap wavelengths to 1.3 μm. Nomarski optical microscopy and double crystal x-ray diffraction (XRD) measurements are used to investigate surface morphology, material quality and lattice-matched conditions. There is little or no 10K photoluminescence from the as-grown layers; alloy activation through rapid thermal annealing must be performed to obtain observable photoluminescence peaks. Annealing is also performed to reduce the resistivity of the as-grown layers. Once annealed, the undoped layers exhibited p-type carrier concentrations of 5.5×1017 cm−3 and mobilities of 50 cm2/Vs. The DC and frequency response performance characteristics of metal-semiconductor-metal (MSM) photodetectors fabricated on both as-grown and annealed InGaNAs layers are examined and compared to similar structures fabricated using GaAs and InGaAs/InP epitaxial materials.

Type
Research Article
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Vurgaftman, I. and Meyer, J.R., J. Appl. Physics 94(6), 3675 (2003)Google Scholar
2. Geiz, J.F., Friedman, D.J., Olson, J.M., Kurtz, S.R., and Keyes, B.M. J. Crystal Growth 195, 401 (1998)Google Scholar
3. Mair, R.A., Lin, J.Y., Jiang, H.X., Jones, E.D., Allerman, A.A., and Kurtz, S.R., Appl. Phys. Lett. 76, 188 (2000)Google Scholar
4. Tournie, E., Pinault, M.A., Laugt, M., Chauveau, J.M., Trampert, A., and Ploog, K.H., Appl. Phys. Lett., 82, 1845 (2003)Google Scholar
5. Chang, W., Lin, J., Zhou, W., Chau, S.J., and Feng, Z.C. Appl. Phys. Lett. 79, 4497 (2001)Google Scholar
6. Kwon, D., Kaplar, R.J., Ringel, S.A., Allerman, A.A., Kurtz, S.R., and Jones, E.D. Appl. Phys/ Lett. 74, 2830 (1999)Google Scholar
7. Beaulieu, C., Gouin, F., Noad, J., Hartman, W., Lisicka-Skrzek, E., Berolo, O., Optoelectronic Integrated Circuit Materials, Physics and Devices, Proc. SPIE vol. 2397, pp. 534, (1995)Google Scholar
8. Gouin, F., Beaulieu, C., Noad, J., Int'l Conf. on Applications of Photonics Technology, edited by Lampropoulos, G.A., Chrostowski, J., Measures, R.M., Plenum, New-York, pp. 435438, (1995)Google Scholar
9. Gouin, F., Beaulieu, C., Noad, J., Optical Network Eng'g & Integrity, edited by Yuce, H.H., Paul, D.K., Greenwell, R.A., SPIE 2611, pp.130–7, 1996.Google Scholar
10. deCorby, R.G., MacDonald, R.I., Sharma, R., Gouin, F., Noad, J., Puets, N., Appl. Phys. Lett., 73, 196 (1998)Google Scholar
11. Cheah, W.K., Fan, W.J., Yoon, S.F., Zhang, D.H., Ng, B.K., Loke, W.K., Liu, R., and Wee, A.T.S., IEEE Photo. Tech Lett. 17, 1041 (2005)Google Scholar