Hostname: page-component-78c5997874-v9fdk Total loading time: 0 Render date: 2024-11-05T15:31:02.543Z Has data issue: false hasContentIssue false
  • English
  • Français

Geochemical Processes at the Carbon steel/bentonite Interface in Repository Conditions

Published online by Cambridge University Press:  19 October 2011

Elena Torres ,
María Jesús Turrero  and
Pedro Luis Martin
Elena Torres
Affiliation:
[email protected], Ciemat, Division of Engineered and Geological Barriers, Avenida Complutense 22, Madrid, 28047, Spain, 00 34 913466187, 00 34 913466542
María Jesús Turrero
Affiliation:
[email protected], Ciemat, Division of Engineered and Geological Barriers, Avenida Complutense 22, Madrid, 28047, Spain
Pedro Luis Martin
Affiliation:
[email protected], Ciemat, Division of Engineered and Geological Barriers, Avenida Complutense 22, Madrid, 28047, Spain
Get access

Abstract

The Deep Geological Repository (DGR) is currently the most accepted management option for the isolation of high level radioactive wastes. The DGR is based on a multibarrier system, which will limit releases of mobile radionuclides to the biosphere. In the design of the repository the spent fuel is encapsulated in canisters of carbon-steel. The space between the canister and the host geological formation will be filled with bentonite buffer clay. Under the prevailing conditions in a DGR, both localized and generalized corrosion phenomena are possible.

Corrosion of the canister will result in formation of solid and gaseous corrosion products, which can influence the behaviour of both the canister and the bentonite. Many studies have been carried out in order to improve the knowledge on the reactivity of these barriers. Most of them have focused on the mineralogical alteration of the bentonite as a function of temperature, time, iron/clay and liquid/rock ratio in batch conditions. The aim of this study is to provide experimental evidences, at repository conditions, on chemical and mineralogical changes during the canister-compacted bentonite interaction: determination of secondary minerals and their alteration reactions, the advance of the corrosion front in the compacted bentonite, and changes in porosity, permeability and cation exchange capacity.

Keywords

corrosiongeologicFe
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 985: Symposium NN – Scientific Basis for Nuclear Waste Management XXX , 2006 , 0985-NN11-14
Copyright
Copyright © Materials Research Society 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hoch, A.R., Honda, A., Porter, F.M., Sharland, S.M. and Taniguchi, N. in Development of mathematical models for long-term prediction of corrosion behaviour of carbon steel overpacks for radioactive waste disposal, edited by Gray, W.J. and Triay, I.R., (Mater. Res. Soc. Symp. Proc. 465, Sci Basis XX, 1997) pp 683–686.Google Scholar
2. Taniguchi, N., Kawasaki, M., Kawakami, S. and Kubota, M.. Corrosion behaviour of carbon steel in contact with bentonite under anaerobic conditions Proceedings of the 2nd Internacional Workshop Eurocorr, edited by NAGRA (2004), pp 24–34.Google Scholar
3. Wilson, J., Savage, D., Cuadros, J., Shibata, M. and Ragnarsdottir, K.V., Geochim. Cosmochim. Acta. 70, 306–322 (2006).Google Scholar
4. Idemitsu, K., Furuya, H., Inagaki, Y. in Diffusion of corrosion products of iron in compacted bentonite, edited by Interranteand, C.G. Pabalan, R.T., (Mater. Res. Soc. Symp Proc. 294, Sci Basis XVI, 1993) pp 467–470.Google Scholar
5. Idemitsu, K., Yano, S., Xiaobin, X.., Inagaki, Y. and Arima, T. in Diffusion Behaviour ofiron corrosion products in Buffer Materials, edited by McGrail, B.P. and Cragnolino, G.A., (Mater. Res. Soc. Symp. Proc. 713, Sci Basis XXV, 2002), pp 113.Google Scholar
6. Kamei, G., Oda, C., Mitsui, S., Shibata, M. and Shinozaki, T.. Eng. Geol. 54 (1), 15 (1999).Google Scholar
7. Bakandritsos, A., Simopoulos, A. and Petridis, D.. Nanotechnology 17, 1112 (2006).Google Scholar