Hostname: page-component-78c5997874-lj6df Total loading time: 0 Render date: 2024-11-06T02:05:52.142Z Has data issue: false hasContentIssue false

Freeform Fabrication of High Performance Titanium Components via SLS/HIP

Published online by Cambridge University Press:  10 February 2011

S. Das
Affiliation:
University of Texas at Austin, Laboratory for Freeform Fabrication, ETC 5.160 C2200, Austin, TX 78712-1063, USA.
J. J. Beaman
Affiliation:
University of Texas at Austin, Laboratory for Freeform Fabrication, ETC 5.160 C2200, Austin, TX 78712-1063, USA.
M. Wohlert
Affiliation:
University of Texas at Austin, Laboratory for Freeform Fabrication, ETC 5.160 C2200, Austin, TX 78712-1063, USA.
D. L. Bourell
Affiliation:
University of Texas at Austin, Laboratory for Freeform Fabrication, ETC 5.160 C2200, Austin, TX 78712-1063, USA.
Get access

Abstract

This paper presents the development of Selective Laser Sintering/Hot Isostatic Pressing (SLS/HIP) technology for production of functional high performance components in the titanium alloy Ti-6AI-4V. SLS/HIP is a net shape manufacturing technique that combines and exploits the freeform shaping capability of selective laser sintering and the full densification capability of hot isostatic pressing. The advantages of SLS combined with in situ HIP encapsulation include single step net shape canning, full densification by containerless HIP, no container-powder adverse interactions, reduced pre-processing time, and minimal post-process machining compared to conventional HIP of canned powders. Microstructure and mechanical properties of SLS processed and HIP post-processed Ti-6A1-4V are consistent with conventionally processed material. The potential of SLS/HIP technology was demonstrated by net shape fabricating a component to specification, namely the titanium guidance section housing base for the AIM-9 Sidewinder missile.

Type
Research Article
Copyright
Copyright © Materials Research Society 1999

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Beaman, Joseph J., Barlow, Joel W., Bourell, David L., Crawford, Richard H., Marcus, Harris L. and McAlea, Kevin P., Solid Freeform Fabrication -A New Direction in Manufacturing, Kluwer Academic Publishers, 1997.Google Scholar
2 Knight, R. et al., “Metal Processing Using Selective Laser Sintering and Hot Isostatic Pressing”, Proc. Solid Freeform Fabrication Symposium 1994, (Austin, TX: U. of Texas, 1994).Google Scholar
3 Freitag, D. W. et al., “Laser directed fabrication of full density metal articles using hot isostatic pressing”, U.S. Patent 5,640,667, 1997 Google Scholar
4 ASM, Metals Handbook Ninth Edition, Volume 9 Metallography and Microstructures, pp. 466, ASM, 1985.Google Scholar
5 American Society for Testing and Materials, ASTM B 367-93 Standard Specification for Titanium and Titanium Castings, 1993.Google Scholar
6 American Society for Testing and Materials, ASTMB 348-95a Standard Specification for Titanium and Titanium Alloy Bars and Billets, 1995.Google Scholar
7 ASM, Metals Handbook Ninth Edition, Volume 3 Properties and Selection, pg. 388, ASM International, 1993.Google Scholar
8 American Society for Testing and Materials, ASTM E 1409-97 Standard Test Method for Determination of Oxygen in Titanium and Titanium Alloys by the Inert Gas Fusion Technique, 1997.Google Scholar
9 Yolton, C.F., Crucible Research, Personal Communication, 1998.Google Scholar