Hostname: page-component-cd9895bd7-p9bg8 Total loading time: 0 Render date: 2024-12-27T00:54:16.724Z Has data issue: false hasContentIssue false
  • English
  • Français

Formation and Properties of Roughened Poly-Si Electrodes for High-Density Drams

Published online by Cambridge University Press:  10 February 2011

H. W. Liu ,
Z. J. Lin ,
S. Y. Yu ,
S. C. Huang  and
H. C. Cheng
H. W. Liu
Affiliation:
Department of Electronics Engineering and Institute of Electronics, National Chiao Tung University, Hsinchu, 300, Taiwan, ROC
Z. J. Lin
Affiliation:
Department of Electronics Engineering and Institute of Electronics, National Chiao Tung University, Hsinchu, 300, Taiwan, ROC
S. Y. Yu
Affiliation:
Mosel Vitelic Incorporation, Science-Based Industrial Park, Hsinchu, 300, Taiwan, ROC
S. C. Huang
Affiliation:
Mosel Vitelic Incorporation, Science-Based Industrial Park, Hsinchu, 300, Taiwan, ROC
H. C. Cheng
Affiliation:
Department of Electronics Engineering and Institute of Electronics, National Chiao Tung University, Hsinchu, 300, Taiwan, ROC
Get access

Abstract

A novel structure, based upon phosphorus-implanted poly-Si films treated with phosphoric acid (H3P 4) and the standard RCA cleaning process, has been demonstrated as the bottom electrodes of DRAMs' stacked capacitors. After the H3PO4 treatment and the RCA cleaning process, micro-islands are formed on the poly-Si surface of the electrodes. For the capacitors with this novel structure, the capacitance value is 18.17 fF/μm2 and the effective oxide thickness is 18.9 Å in comparison with conventional capacitors of 5.77 fFW/μm2 and 59.5 Å. The roughened poly-Si electrode can achieve a surface enlargement of 3.15 times. The leakage current density at +1.65V and −1.65V are 7.24 × 10−8 A/cm2 and −3.31 × 10−8 A/cm2, respectively, fulfilling the requirements of 256Mb DRAMs. Weibull plots of time-zero-dielectric-breakdown (TZDB) characteristics under ramping voltage test also show tight distribution and good electrical properties. It indicates that the phosphorus-implanted poly-Si films etched by H3PO4 and then cleaned with the standard RCA process can easily and simply increase the surface area and have good electrical properties fulfilling the requirements of 256Mb DRAMs and beyond.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 441: Thin Films – Structure and Morphology , 1996 , 119
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Hayahide, Y., Miyatake, H., Mitsuhashi, J., Hirayama, M., Higaki, T., and Abe, H., Jpn. Appl. Phys. Lett. 29, L2345 (1990).Google Scholar
2. Ahn, J. H., Park, Y. W., Shin, J. H., Kim, S. T., Shim, S. P., Nam, S. W., Park, W. M., Shin, H. B., Choi, C. S., Kim, K. T., Chin, D., Kwon, O. H., and Hwang, C. G., Symp. on VLSI Tech. Dig. of Technical Papers, 12 (1992).Google Scholar
3. Yu, S., Chun, K., and Lee, J. D., IEEE Electron Device Lett. 8, 369 (1993).Google Scholar
4. Watanabe, H., Aoto, N., Adachi, S., and Kikkawa, T., J. Appl. Phys. 71, 3538 (1992).Google Scholar
5. Yoshimaru, M., Miyano, J., Inoue, N., Sakamoto, A., You, S., Tamura, H., and Ino, M., IEDM Tech. Dig. 659 (1990).Google Scholar
6. Itoh, H., Miyatake, Y., Takahashi, M., Kimira, Y., Endoh, A., Nagatomo, Y., Yoshimaru, M., Ichikawa, F., and Ion, M., Symp. on VLSI Tech. Dig. of Technical Papers, 9 (1991).Google Scholar
7. Fazan, P. C., Mathews, V. K., Chan, H. C., and Ditali, A., IEEE Electron Device Lett. 2, 86 (1992).Google Scholar
8. Kaga, T., Kure, T., Shinriki, H., Kawamoto, Y., Murai, F., Nishida, T., Nakagome, Y., Hisamoto, D., Kisu, T., Takeda, E., and Itoh, K., IEEE Trans. Electron Devices 38–2, 255 (1991).Google Scholar
9. Watanabe, H., Honma, I., Ohnishi, S., and Kitajima, H., Symp. on VLSI Tech. Dig. of Technical Papers, 17 (1993).Google Scholar
10. Miyashita, M., Itano, M., Imaoka, T., Kawanabe, I., and Ohmi, T., Symp. on VLSI Tech. Dig. of Technical Papers, 45 (1991).Google Scholar