Hostname: page-component-78c5997874-dh8gc Total loading time: 0 Render date: 2024-11-19T02:09:36.442Z Has data issue: false hasContentIssue false
  • English
  • Français

Formation and Phase Transformation of R. F. Sputter Deposited NON-BCC 6-A15 Chromium Thin Films

Published online by Cambridge University Press:  10 February 2011

J. P. Chu ,
J. W. Chang ,
P. Y. Lee  and
J. K. Wu
J. P. Chu
Affiliation:
Institute of Materials Engineering, National Taiwan Ocean University, Keelung, Taiwan, R.O.C.
J. W. Chang
Affiliation:
Institute of Materials Engineering, National Taiwan Ocean University, Keelung, Taiwan, R.O.C.
P. Y. Lee
Affiliation:
Institute of Materials Engineering, National Taiwan Ocean University, Keelung, Taiwan, R.O.C.
J. K. Wu
Affiliation:
Institute of Materials Engineering, National Taiwan Ocean University, Keelung, Taiwan, R.O.C.
Get access

Abstract

Formation and phase transformation of non-BCC δ-A15 Cr thin films prepared by R. F. magnetron sputtering have been characterized. Processing parameters such as working pressure, deposition time and temperature were found to affect the formation of δ-A15 Cr films. Using differential scanning calorimetry, we have demonstrated for the first time that the phase transformation of the δ-A15 Cr phase to the equilibrium c-BCC Cr phase is an irreversible, exothermic, first-order transition. At a heating rate of 10°C/min, the onset and peak temperatures of transformation were determined to be 428°C and 437°C, respectively. Our post-deposition annealing study by X-ray diffraction further verified the occurrence of transformation.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 441: Thin Films – Structure and Morphology , 1996 , 347
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Kimoto, K., Kamiya, Y., Nonoyama, M. and Uyeda, R., Jpn. J. Appl. Phys. 2, 702 (1963).Google Scholar
2. Kimoto, K. and Nishida, I., J. Phys. Soc. Jpn. 22, 744 (1967).Google Scholar
3. Saito, Y., Mihama, K., and Uyeda, R., Jpn. J. Appl. Phys. 19, 1603 (1980).Google Scholar
4. Bîrjega, M. I. and Popescu-Pogrion, N., Thin Solid Films 171, 33 (1989).Google Scholar
5. Nörenberg, H. and Neumann, H.-G., Thin Solid Films 198, 241 (1991).Google Scholar
6. O'Keefe, M. J., Horiuchi, S., Chu, J. P., and Rigsbee, J. M., in Phase Transformation in Thin Films, edited by M., Atzmon et al., (Mater. Res. Soc. Proc. 311, Pittsburgh, PA, 1993) pp. 361–366.Google Scholar
7. O'Keefe, M. J., Horiuchi, S., Rigsbee, J. M. and Chu, J. P., Thin Solid Films 247, 169 (1994).Google Scholar
8. Arita, M. and Nishida, I., Jpn. J. Appl. Phys. 32, 1759 (1993).Google Scholar
9. O'Keefe, M. J. and Grant, J. T., J. Appl. Phys. 79, 9134 (1996).Google Scholar
10. For example, see the proceedings of an invited-speaker-only symposium Thermal Analysis in Metallurgy, edited by Shull, R. D. and A., Joshi, TMS, 1992.Google Scholar
11. Chu, J. P., Chang, J. W., Lee, P. Y., Wu, J. K. and Wang, J. Y., to be published.Google Scholar