Hostname: page-component-586b7cd67f-t7czq Total loading time: 0 Render date: 2024-11-27T12:04:00.857Z Has data issue: false hasContentIssue false

Flexible Ceramic-Polymer Composite Substrates with Spatially Variable Dielectrics for Miniaturized RF Applications

Published online by Cambridge University Press:  31 January 2011

Zuhal Tasdemir
Affiliation:
[email protected], Sabanci University, Mechatronics Engineering, Sabanci University, Orhanli, 34956, Tuzla, Istanbul, 34956, Turkey, 2164839584, 2164839550
Gullu Kiziltas
Affiliation:
[email protected], Sabanci University, Material Science and Engineering, Istanbul, Turkey
Get access

Abstract

The goal of this research is to develop a process suitable for producing monolithic conformal substrates with a spatial arrangement of material cells according to a particular design creating novel material systems, useful for many multi- functional electronic and Radio Frequency devices. In this study, MCT ceramics (Mg-Ca-Ti-O systems) and organic binders (polymer solution) are mixed and fabricated as films through a process called tape casting to compromise between high dielectric constant and flexibility. Prior to optimizing the process, several characterization studies are carried out: Commercial spray dried MCT powders (Transtech Inc.) with dielectric constant k=70 and k=20 were analyzed as pressed and produced into tape cast films. Dielectric properties are then measured by an Agilent 16451B material analysis kit and their microscopic behavior is examined by scanning electron microscopy. Results show that flexible composite films show a maximum dielectric constant of ε∼22 unlike their powder pressed form with ε ∼16 but their loss behavior deteriorates when compared with their sintered form and a loss tangent factor of 0.001. The difference is attributed to the air content vs. polymer presence of the material in powder pressed form. Also, these substrates naturally are no longer flexible; hence studies are focused on their tape cast form. The potential of these dielectric shades to serve as candidate constituents for producing monolithic textured polymer-ceramic-composites with controllable loss is studied further. Four properties are of prime importance: tunability of dielectric constants to achieve miniaturization, flexibility via low temperature processing of polymers and loss controllability.

Type
Research Article
Copyright
Copyright © Materials Research Society 2009

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Volakis, J. L. Mumcu, G. Sertel, K. Chen, C.-C., Lee, M. Kramer, B. Psychoudakis, D. Kiziltas, G., IEEE Antennas and Propagation Magazine 48 (5), 1228 (2006).Google Scholar
[2] Koulouridis, S. Kiziltas, G. Zhou, Y. Hansford, D. Volakis, J. L. IEEE Transactions on Microwave Theory and Techniques 54, 42024208 (2006).Google Scholar
[3] Wing, Z. N. and Halloran, J. W. Halloran, J. Am. Ceram. Soc., 89 (11), 3406–12 (2006).Google Scholar