Hostname: page-component-586b7cd67f-vdxz6 Total loading time: 0 Render date: 2024-11-25T18:04:41.137Z Has data issue: false hasContentIssue false
  • English
  • Français

Feedback Control of Temperature Profiles During Microwave Joining of Ceramics

Published online by Cambridge University Press:  15 February 2011

Mengli Li ,
Guy O. Beale  and
W. Murray Black
Mengli Li
Affiliation:
Department of Electrical and Computer Engineering, George Mason University, Fairfax, Virginia 22030
Guy O. Beale
Affiliation:
Department of Electrical and Computer Engineering, George Mason University, Fairfax, Virginia 22030
W. Murray Black
Affiliation:
Department of Electrical and Computer Engineering, George Mason University, Fairfax, Virginia 22030
Get access

Abstract

The goal of this research is to develop an automatic feedback control system for ceramic samples being heated by microwave energy for the purpose of joining the samples. This paper describes two major topics connected with the research. First, the temperature control algorithm is described, and experimental results from testing that control algorithm with actual ceramic samples are presented. Secondly, the microwave cavity is modeled using a transmission line approach to relate iris and plunger positions to absorbed power. Equations are presented which give the proper positions for maximizing the absorbed power, and a control strategy for the iris and plunger is discussed. This research has been funded under NSF Grant No. DDM - 9115417.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 347: Symposium O – Microwave Processing of Materials IV , 1994 , 643
Copyright
Copyright © Materials Research Society 1994

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Beale, G.O. and Arteaga, F.J., Spr. Mtg. Mat. Res. Soc., San Francisco, Vol. 269, p. 265 (1992).Google Scholar
2. Beale, G.O., Arteaga, F.J., and Black, W.M., IEEE Trans, on Ind. Elee, Vol. 39, No. 4 (1992).Google Scholar
3. Fukushima, H., Yamanaka, T. and Matsui, M., J. Mater. Res., Vol 6, No. 2, p. 397 (1990).Google Scholar
4. Hostetter, G.H., Digital Control System Design, Holt, , Rinehart, , and Winston, (1988).Google Scholar
5. Marcuvitz, N., Waveguide Handbook, vol 10, McGraw-Hill (1951).Google Scholar
6. Araneta, J. A., Brodwin, M.E., and Kriegsmann, G. A., IEEE Trans. Microwave Theory Tech., Vol. MTT–32, pp. 1328–1335 (1984).Google Scholar
7. Collin, R.E., Foundations for Microwave Engineering, 2nd Edition, McGraw-Hill (1992).Google Scholar