Article contents
Factors Controlling Ionic Conductivity of Plasticized and Non-Plasticized Crosslinked Polyether Electrolytes
Published online by Cambridge University Press: 28 February 2011
Abstract
A series of elastomeric (urethane crosslinked) polyether electrolytes have been prepared in order to investigate the influence on conductivity of crosslink density, length of uninterrupted polyether chain, number of side chains and plasticizer content. Crosslink density was found to only weakly influence conductivity, but had the expected major effect on elastic modulus. Increases in uninterrupted polyether chain length were also found to enhance conductivity. The number of side chains (acting as an internal plasticizer) was not found to have a marked effect on conductivity within the range studied. The highest room temperature conductivity observed in these non-plasticized elastomers was 3 × 10-5 Ω-1 cm-1. Addition of a low molecular weight plasticizer such as tetraglyme was found to markedly increase the conductivity and lower Tg. The highest room temperature conductivity observed in 50% plasticized elastomeric materials was 10-3 Ω-1cm-1.
- Type
- Research Article
- Information
- Copyright
- Copyright © Materials Research Society 1991
References
- 4
- Cited by