Hostname: page-component-6bf8c574d5-8gtf8 Total loading time: 0 Render date: 2025-02-20T14:59:20.917Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication Technologies of Field Emitter Arrays

Published online by Cambridge University Press:  10 February 2011

J. H. Choi ,
Y. S. Ryu ,
J. H. Kang ,
J. E. Jang ,
J. M. Kim ,
J. P. Hong ,
D. Y. Lim  and
V. Michine
J. H. Choi
Affiliation:
Materials sector, Display Materials Lab, Samsung Advanced Institute of Technology, P.O. Box 11, Suwon, Korea 440–600, [email protected]
Y. S. Ryu
Affiliation:
Materials sector, Display Materials Lab, Samsung Advanced Institute of Technology, P.O. Box 11, Suwon, Korea 440–600, [email protected]
J. H. Kang
Affiliation:
Materials sector, Display Materials Lab, Samsung Advanced Institute of Technology, P.O. Box 11, Suwon, Korea 440–600, [email protected]
J. E. Jang
Affiliation:
Materials sector, Display Materials Lab, Samsung Advanced Institute of Technology, P.O. Box 11, Suwon, Korea 440–600, [email protected]
J. M. Kim
Affiliation:
Materials sector, Display Materials Lab, Samsung Advanced Institute of Technology, P.O. Box 11, Suwon, Korea 440–600, [email protected]
J. P. Hong
Affiliation:
Materials sector, Display Materials Lab, Samsung Advanced Institute of Technology, P.O. Box 11, Suwon, Korea 440–600, [email protected]
D. Y. Lim
Affiliation:
Materials sector, Display Materials Lab, Samsung Advanced Institute of Technology, P.O. Box 11, Suwon, Korea 440–600, [email protected]
V. Michine
Affiliation:
Materials sector, Display Materials Lab, Samsung Advanced Institute of Technology, P.O. Box 11, Suwon, Korea 440–600, [email protected]
Get access

Abstract

Total internal reflection (TIR) holographic lithography is studied as a new method for field emitter array (FEA) fabrication. Four basic parameters of the process - scan speed, laser power, focus distance and step distance, are analyzed to optimize the hole patterns. In addition, the characteristics of the Aluminum (Al) parting layer are studied to minimize the stress produced by Molybdenum (Mo) layer during Spindt-type tip formation process.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 471: Symposium G – Flat Panel Display Materials III , 1997 , 211
Copyright
Copyright © Materials Research Society 1997

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Stetson, Karl A., “Holography with Total Internally Reflected Light”, Applied Physics Letters, pp225, vol 11, Oct.(1967)Google Scholar
2. Kim, J.M., Gorfinkel, B.I., Kang, J.H., Roussina, E.V., Kim, J. W., Chernyaeva, I.V., Choi, J.H., Zoulkarneev, A.R., “4” Field emission display development and its reliability analysis” IVMC ‘96, pp566 (1996)Google Scholar
3. Isnard, Robert “Pixel International the field emission display company”, IVMC ‘94, pp 413 (1994)Google Scholar
4. Ito, S., Watanabe, T., Yamamura, T., and Yano, K., Asia Dispalys ‘95 Tech. Dig. 617 (1995)Google Scholar
5. Clube, F., gray, S., Struchen, D., Tisserand, J-C, Malfoy, S., Darbellay, I.,”Holographic Microlithography”, Optical Engineering, pp2274, vol 34, No.9 Oct.(1995)Google Scholar
6. Gray, S., Clube, F., “New developments in holographic mask lithography for large substrates”, Eurodisplay 93Google Scholar
7. Ehbets, P., Herzig, H.P., Dandliker, R., “TIR holography revisited by coupled wave theory” 3rd International Conference on Holographic Systems, components and Applications Sep.(1991)Google Scholar
8. Spindt, C.A., Brodie, I., Humphrey, L., and Westberg, E.R., J. Appl. Phys. 47, 5248 (1976)Google Scholar
9. Itoh, Shigeo et al, “Experimental Study of Field Emission Properties of the Spindt Type Emitter”, pp217, IVMC ‘94 conference (1994)Google Scholar
10. TENCOR FLX 2320 USER MANUALGoogle Scholar
11. Balzers, “Coating Materials and Targets” Catalogue (1995)Google Scholar