Hostname: page-component-cd9895bd7-gbm5v Total loading time: 0 Render date: 2024-12-27T01:36:12.633Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of Periodic Arrays of Nano-sized Si and Ni dots on SiO2 Using Linearly Polarized Nd:YAG Pulsed Laser

Published online by Cambridge University Press:  01 February 2011

Kensuke Nishioka  and
Susumu Horita
Kensuke Nishioka
Affiliation:
[email protected], Japan Advanced Institute of Science and Technology, School of Material Science, 1-1 Asahidai, Nomi, 923-1292, Japan, +81-761-51-1562, +81-761-51-1149
Susumu Horita
Affiliation:
[email protected], Japan Advanced Institute of Science and Technology, School of Material Science, 1-1 Asahidai, Nomi, 923-1292, Japan
Get access

Abstract

Periodic arrays of nano-sized Si and Ni dots were fabricated by only irradiating a linearly polarized Nd:YAG pulsed laser beam to Si and Ni thin films deposited on silicon dioxide (SiO2) film. The interference between an incident beam and a scattered surface wave leads to the spatial periodicity of beam energy density distribution on the surface of the irradiated samples. A thin film was melted using a laser beam, and the molten film was split and condensed owing to its surface tensile according to the periodic energy density distribution. Then, the fine lines (line and space structure) were formed periodically. After the formation of fine lines, the sample was rotated by 90°, and the laser beam was irradiated. The periodic energy density distribution was generated on the fine lines, and the lines split and condensed according to the periodic energy density distribution. Eventually, the periodically aligned nano-sized dots were fabricated on the SiO2 film.

Keywords

nanostructurelaser-induced reactionthin film
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 1059: Symposium KK – Nanoscale Pattern Formation , 2007 , 1059-KK08-09
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Horita, S., Nakata, Y., Shimoyama, A., Appl. Phys. Lett. 78, 2250 (2001)Google Scholar
2. Nishioka, K., Horita, S., Jpn. J. Appl. Phys. 46, 4154 (2007)Google Scholar
3. Eustathopolous, N., Drevet, B., Mater. Sci. Eng. A 249, 176 (1998)Google Scholar
4. Fujii, H., Yamamoto, M., Hara, S., Nogi, K., J. Mater. Sci 34, 3165 (1999)Google Scholar
5. Henley, S. J, Carey, J. D, Silva, S. R. P., Phys. Rev. B 72, 195408 (2005)Google Scholar
6. Henrich, V. E, Cox, P. A, The Surface Science of Metal Oxides (Cambridge University Press 1994)Google Scholar