Hostname: page-component-586b7cd67f-dsjbd Total loading time: 0 Render date: 2024-11-22T23:06:11.300Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of Novel Porous Chitosan Matrices as Scaffolds for Bone Tissue Engineering

Published online by Cambridge University Press:  01 February 2011

Tao Jiang ,
Cyril M. Pilane  and
Cato T. Laurencin
Tao Jiang
Affiliation:
Department of Chemical Engineering, University of Virginia, Charlottesville, VA, USA
Cyril M. Pilane
Affiliation:
Department of Orthopaedic Surgery, University of Virginia, Charlottesville, VA, USA
Cato T. Laurencin*
Affiliation:
Department of Chemical Engineering, University of Virginia, Charlottesville, VA, USA Department of Orthopaedic Surgery, University of Virginia, Charlottesville, VA, USA Department of Biomedical Engineering, University of Virginia, Charlottesville, VA, USA
*
* Cato T. Laurencin M.D., Ph.D., University Professor, Lillian T. Pratt Distinguished Professor and Chair of Orthopaedic Surgery, Professor of Biomedical and Chemical Engineering, 400. Ray C. Hunt Drive, Suite 330, University of Virginia, Charlottesville, VA 22908, Ph: 1-434-243-0250, Fax: 1-434-243-0242, Email address: [email protected]
Get access

Abstract

Three dimensional (3-D) scaffolds with appropriate mechanical properties play a significant role in scaffold-based tissue engineering. Chitosan, a natural polymer obtained from chitin, which forms a major component of crustacean exoskeleton, is a potential candidate for bone tissue engineering due to its excellent osteocompatibility and biodegradability. The aim of the present study is to develop 3-D porous chitosan scaffolds with mechanical properties in the range of trabecular bone as scaffolds for bone tissue engineering. Three dimensional scaffolds were prepared by sintering chitosan microspheres. Chitosan microspheres were prepared by ionotropic gelation of chitosan solution using sodium tripolyphosphate. It has been found that the microsphere size increased significantly with the increase of the concentration of chitosan solution. The microspheres were then sintered together using the synergetic effect of solvent and temperature. The compressive moduli of the 3-D sintered matrices were found to be in the mid range of trabecular bone. The osteocompatibility and osteoconductivity of the 3-D matrices were demonstrated by adhesion and proliferation of MC3T3-E1 osteoblast like cells on the matrices after 14 days in culture.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 845: Symposium AA – Nanoscale Materials Science in Biology and Medicine , 2004 , AA9.3
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Langer, R., and Vacanti, J.P., Science 260, 920 (1993).Google Scholar
2. Laurencin, C.T., Ambrosio, A.M.A., Borden, M.D., and Cooper, J.A. Jr, Annu. Rev. Biomed. Eng. 01, 19, (1999).Google Scholar
3. Vande Vord, P.J., Matthew, H.W.T., DeSilva, S.P., Mayton, L., Wu, B., and Wooley, P.H., J. Biomed. Mater. Res. 59, 585 (2002).Google Scholar
4. Khor, E., Chitin: fulfilling a biomaterials promise, (Elsevier, Oxford, 2001) p. 55.Google Scholar
5. Tomihata, K., and Ikada, Y., Biomaterials 18, 567 (1997).Google Scholar
6. Nishimura, K., Nishimura, S., Nishi, N., Saiki, I., Tokura, S., and Azuma, I., Vaccine 2, 93 (1984).Google Scholar
7. Choi, B.K., Kim, K.Y., Yoo, Y.J., Oh, S.J., Choi, J.H., and Kim, C.Y., Int. J. Antimicrob Agents. 18, 553 (2001).Google Scholar
8. Muzzarelli, R.A.A., Mattioli-Belmonte, M., Tietz, C., Biagini, R., Ferioli, C., Brunelli, M.A., Fini, M., Giardino, R., Ilari, P., and Biagini, G., Biomaterials 15, 1075 (1994).Google Scholar
9. Borah, G., and Scott, G. in Advances in chitin and chitosan, edited by Brine, C.J., Sandford, P.A., Zikakis, J.P. (Elsevier, 1992), p. 47.Google Scholar
10. Madihally, S.V., and Matthew, H.W.T., Biomaterials 20, 1133 (1999).Google Scholar
11. Zhang, Y., and Zhang, M., J. Biomed. Mater. Res. 61, 1 (2002).Google Scholar
12. Keaveny, T.M., and Hayes, W.C. in Bone. A treatise, Volume 7: Bone growth; B, edited by Hall, B.K. (CRC press, Boca Raton, FL, 1993), p. 285.Google Scholar
13. Mi, F.L., Shyu, S.S., Kuan, C. Y., Lee, S.T., Lu, K.T., and Jang, S.F., J. Appl. Polym. Sci. 74, 1868 (1999).Google Scholar
14. Borden, M., El-Amin, S.F., Attawia, M., and Laurencin, C.T., Biomaterials 24, 597 (2003).Google Scholar