Hostname: page-component-586b7cd67f-rcrh6 Total loading time: 0 Render date: 2024-11-29T07:32:58.328Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of New Multilayer Heterostructures Based on Self-Assembled Layers of Poly(amic acid) with Various Electroactive Polymers

Published online by Cambridge University Press:  10 February 2011

J. W. Baur ,
P. Besson ,
S. A. O'Connor  and
M. F. Rubner
J. W. Baur
Affiliation:
Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, Cambridge, MA 02139.
P. Besson
Affiliation:
Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, Cambridge, MA 02139.
S. A. O'Connor
Affiliation:
Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, Cambridge, MA 02139.
M. F. Rubner
Affiliation:
Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, Cambridge, MA 02139.
Get access

Abstract

Self-assembled films of pyromellitic dianhydride oxydianiline (PMDA-ODA) were fabricated through the alternate adsorption of poly(amic acid) and various polycations including poly(allyl amine) (PAH), polyaniline (PAni), and the tetrahydrothiophene precursor of poly(p-phenylene vinylene) (PPV). In all cases, a linear build-up in thickness with increasing number of bilayers was observed with a high sensitivity of the average bilayer thickness to the ionic strength of the poly(amic acid) solution. By controlling the ionic strength of the PAA solution, the bilayer thickness could be varied from 10 to 100 Å, depending on the polycation used. Examination of the self-assembled films of poly(amic acid) and PAni showed that a conductivity of 0.5 S/cm could be achieved prior to conversion of the polyimide, but that the conductivity was drastically reduced when either the ionic strength of the poly(amic acid) solution was increased or when the poly(amic acid) was converted to polyimide. The self-assembly of poly(amic acid) with precursor PPV demonstrated that it was possible to produce a film which can be self-assembled as two ionic precursor polymers and then thermally converted into a film composed of two non- ionic polymers. Advancing sessile water drop contact angle measurements revealed that very hydrophobic surfaces can be generated upon conversion of the PAA/precursor PPV films.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 413: Symposium W – Electrical, Optical, and Magnetic Properties of Organic Solid State Materials III , 1995 , 583
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Decher, G., Hong, J. D., Schmitt, J., Thin Solid Films 210/211, 831 (1992).Google Scholar
2. Yoo, D. and Rubner, M. F., SPE: Conf. Proc. of ANTEC, Vol. II-Materials, 1594 (1995).Google Scholar
3. a) Cheung, J. H., Fou, A. C., and Rubner, M. F., Thin Solid Films 244, 985 (1994). b) A.C.Fou and M. F.Rubner, Macromolecules 28, 7115 (1995).Google Scholar
4. a) Ferreira, M. and Rubner, M. F., Macromolecules 28, 7107 (1995). b) M.Ferreira, J. H.Cheung, and M.F.Rubner, Thin Solid Films 244, 806 (1994).Google Scholar
5. Fou, A. C., Onitsuka, O., Ferreira, M., and Rubner, M. F., Mat. Res. Soc. Symp. Proc. 369, 575 (1995).Google Scholar
6. Decher, G. and Hong, J., Makromol. Chem. Macromol. Symp. 46, 321 (1991).Google Scholar
7. Lvov, Y., Ariga, K., Kunitake, T., Chem. Lett., 2323 (1994).Google Scholar
8. Lvov, Y., Essler, F., and Decher, G., J. Phys. Chem. 97, 13773 (1993).Google Scholar
9. Hsieh, B. R., Antoniadis, H., Abkowitz, M. A., and Stolka, M., Polymer Preprints 33(2), 414 (1992).Google Scholar
10. Lvov, Y., Decher, G., Sukhorukov, G., Macromolecules 26, 5396 (1993).Google Scholar
11. Wilson, D., Stenzenberger, H. D., and Hergenrother, P. M., Polyimides(Blackie & Son, Ltd, London, 1990), p. 16.Google Scholar
12. Stockton, W. B. and Rubner, M. F., Mat. Res. Soc. Symp. Proc. 328, 257 (1994).Google Scholar
13. Schmitt, J., Grunewald, T., Decher, G., Persham, P. S., Kjaer, K., Losche, M., Macromolecules 26, 7058 (1993).Google Scholar