Hostname: page-component-cd9895bd7-jn8rn Total loading time: 0 Render date: 2024-12-27T02:22:12.402Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of MEMS Devices with Macroporous Silicon Membrane Embedded with Modulated 3D Structures for Optimal Cell Sorting

Published online by Cambridge University Press:  11 February 2011

Natalya Tokranova ,
Xiaojun Feng ,
Steve Olson ,
Tang Tang ,
Bai Xu  and
James Castracane
Natalya Tokranova
Affiliation:
School of Nanosciences and NanoEngineering, University at Albany (SUNY), 251 Fuller Rd, Albany, New York
Xiaojun Feng
Affiliation:
School of Nanosciences and NanoEngineering, University at Albany (SUNY), 251 Fuller Rd, Albany, New York
Steve Olson
Affiliation:
School of Nanosciences and NanoEngineering, University at Albany (SUNY), 251 Fuller Rd, Albany, New York
Tang Tang
Affiliation:
School of Nanosciences and NanoEngineering, University at Albany (SUNY), 251 Fuller Rd, Albany, New York
Bai Xu
Affiliation:
School of Nanosciences and NanoEngineering, University at Albany (SUNY), 251 Fuller Rd, Albany, New York
James Castracane
Affiliation:
School of Nanosciences and NanoEngineering, University at Albany (SUNY), 251 Fuller Rd, Albany, New York
Get access

Abstract

Macroporous silicon is a type of porous silicon that has ordered arrays of channels with high aspect ratio. Macroporous silicon with ordered 3-D structures have a variety of applications such as filters for a particle separation, photonic crystals and optical shortpass filters because of their spatially periodic structures [1–3]. These structures can be prepared by the electrochemical etching (ECE) of silicon wafers in hydrofluoric acid (HF). We report here a way to fabricate macroporous silicon membranes with ordered 3D structures that have controlled periodicity and dimensions appropriate for cell sorting. The silicon 3D structures have pores with variable diameters to modulate the flow behavior and optimize cell sorting efficiency. The silicon membranes were fabricated by wet etching of n-type (100) silicon substrate (40–60 W cm) in potassium hydroxide (KOH) solution with isopropyl alcohol at 80 °C. The 3-D structures were prepared by the electrochemical etching (ECE) of the membranes in diluted HF using the backside illumination with modulated intensity. The thickness of the fabricated membrane has been varied from 20 to 200 mm to optimize filtration of the cells by MEMS (Micro-ElectroMechanical Systems) chips designed for biological cell sorting and cell positioning. The software packages IntelliSuite and ANSYS FLOWTRAN were used to study the mechanical strength of the membrane as well as the velocity profile and flow behavior of Newtonian fluids inside the macroporous silicon membrane.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 752: Symposium AA – Membranes–Preparation, Properties and Applications , 2002 , AA14.6
Copyright
Copyright © Materials Research Society 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Schilling, J., Muller, F., Matthias, S., Wehrspohn, R. B., and Gosele, U. “Three-dimensional photonic crystals based on macroporous silicon with modulated pore diameter” Applied Physics Letters, February 2001, Vol.78, N 9, pp.1180–1182 Google Scholar
2. Lehmann, V., Stengl, R., and Reisinger, H. “Optical shortpass filters on macroporous silicon” Applied Physics Letters, January 2001, Vol.78, N 5, pp.589–591 Google Scholar
3. Kettner, C., Reimann, P., Hanggi, P., Muller, F. “Drift ratchet” Physical Review E, 2000, Vol.61, N 1, pp.312–323 Google Scholar
4. Iosub, R., Moldovan, C., Modreanu, M. “Silicon membranes fabrication by wet anisotropic etching” Sensors and Actuators, 2002, A99, pp.104–111 Google Scholar
5. Divan, R., Moldovan, N., Camon, H. “Roughning and smoothing dynamics during KOH silicon etching” Sensors and Actuators, 1999, V.74, pp.18–23 Google Scholar
6. Lehmann, V. and Foll, H. “Formation Mechanism and Property of Electrochemically Etched Thenches in n-Type Silicon” J. Electrochem. Soc., 1990, Vol.137, N 2, pp.653–659 Google Scholar
7. Lehmann, V. “The Physics of Macropore Formation in Low Doped n-Type Silicon” J. Electrochem. Soc., 1993, Vol.140, N 10, pp.2836–2843 Google Scholar
8. Foll, H., Christophersen, M., Carstensen, J., Hasse, G. “Formation and application of porous silicon”, Materials Science and Engineering, 2002, R39, pp.93–141 Google Scholar
9. Lehmann, V. “The physics of macroporous silicon formation”, Thin Solid Films, 1995, Vol.255, pp.1–4 Google Scholar
10. Grigoras, K., Niskanen, A. J., Franssila, S. “Plasma etched initial pits for electrochemically etched macroporous silicon structures” J. Micromech. Microeng. 2001, Vol.11, pp.371375 Google Scholar