Hostname: page-component-78c5997874-fbnjt Total loading time: 0 Render date: 2024-11-06T06:59:37.305Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication of Carbon Fiber Reinforced Cement Composites

Published online by Cambridge University Press:  16 February 2011

S. B. Park  and
B. L Lee
S. B. Park
Affiliation:
Department of Civil Engineering, Chungnamn National University, Daejon, Korea
B. L Lee
Affiliation:
Department of Ceramic Engineering, Clemson University, Clemson, SC 29634, USA
Get access

Abstract

Portland cement was reinforced by carbon fibers (CF) with various additive materials -- silica powders, superplasticizer, polymer emulsion, fly ash, and foaming agent -- for different purposes. The variables affecting the composite properties were identified. The mechanical properties -- tensile, compressive, and flexural strengths -- were determined as a function of CF loading and length of the fibers. The bulk density of the composites decreased as the fiber loading increased. The tensile strength increased with the CF loading increase but the compressive strength decreased as the fiber content in the composite increased. Increasing difficulty in dispersing CF as the fiber loading increase and the fiber length was rectified by addition of silica aggregates. The mechanical properties were improved as the size of silica aggregate decreased which also exhibited greater effectiveness in CF dispersion. Addition of a polymer emulsion, ethyl vinyl acetate (EVA) to the composite decreased the bulk density but increased tensile and compressive strengths.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 211: Symposium O – Fiber-Reinforced Cementitious Materials , 1990 , 247
Copyright
Copyright © Materials Research Society 1991

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 . Goldfeinh, S., Modem Plastics, 42, 156 (1965).Google Scholar
2. Grimer, F.J. and Magazine, M.A. Concrete Research, 21,23 (1969).CrossRefGoogle Scholar
3. Nielson, L.E. and Chen, P.E., J. Mater. Sci., 3, 52 (1968).Google Scholar
4. Swamy, R.N. and Mangat, P.S., ACI J., Sp-44, 1 (1974).Google Scholar
5. Hannant, D.J., Fibre Cements and Fibre Concretes, (John Wiley and Sons, New York, 1978), p. 146.Google Scholar
6. Naaman, A.N., Shah, S.P., and Thorne, J.L., ACI Pub., Spring-81, p. 373.Google Scholar
7. Ali, M.A., Majumdar, A.J., and Rayment, D.L., Cement and Concrete Research, 2, 201 (1972).CrossRefGoogle Scholar
8. Ohama, Y., Demura, K., and Sato, Y., Proc. Inter. Symp. on Fibre Reinforced Concrete, Madras, India, Dec. 16–19, 1987, Oxford and IBH Pub. co., New Delhi, p. 323.Google Scholar
9. Ohama, Y., Carbon, 27,729 (1989).CrossRefGoogle Scholar
10. Paillere, A.M., Buil, M., and Serrano, J.J., ACI Mater. J., March-April, 139 (1989).Google Scholar
11. Lim, Y.S. and Lee, B.I., Carbon, 27,739 (1989).Google Scholar
12. Waller, J.A., Civil Eng. Public Works, Rev. 67, 357 (1972).Google Scholar
13. park, S.B. and Rhee, B.S., J. Korean Soc. Composite Mater., 1. 34 (1988).Google Scholar
14. Akihama, S., Seunaga, T., and Banno, T., Kajima Inst. Construction Techn., KICT Report No. 53, July 1984.Google Scholar
15. Ohama, Y., Amano, M., and Endo, M., Concrete Intern., 7, 58 (1985).Google Scholar