Hostname: page-component-78c5997874-xbtfd Total loading time: 0 Render date: 2024-11-17T16:14:58.444Z Has data issue: false hasContentIssue false
  • English
  • Français

Fabrication and Characterization of a PZT thin Film Actuator for a Micro Electromechanical Switch Application

Published online by Cambridge University Press:  17 March 2011

Marcus Hoffmann ,
Timm Leuerer ,
Clemens Krüger ,
Ulrich Böttger ,
Wilfried Mokwa  and
Rainer Waser
Marcus Hoffmann
Affiliation:
Institute of Materials in Electrical Engineering and Information Technology II, University of Aachen, Sommerfeldstrasse 24, 52074 Aachen, Germany
Timm Leuerer
Affiliation:
Institute of Materials in Electrical Engineering I, University of Aachen, Sommerfeldstrasse 24, 52074 Aachen, Germany
Clemens Krüger
Affiliation:
Institute of Materials in Electrical Engineering I, University of Aachen, Sommerfeldstrasse 24, 52074 Aachen, Germany
Ulrich Böttger
Affiliation:
Institute of Materials in Electrical Engineering and Information Technology II, University of Aachen, Sommerfeldstrasse 24, 52074 Aachen, Germany
Wilfried Mokwa
Affiliation:
Institute of Materials in Electrical Engineering I, University of Aachen, Sommerfeldstrasse 24, 52074 Aachen, Germany
Rainer Waser
Affiliation:
Institute of Materials in Electrical Engineering and Information Technology II, University of Aachen, Sommerfeldstrasse 24, 52074 Aachen, Germany Institute of Electroceramic Materials (EKM), Department IFF, Research Center Jülich, 52425 Jülich, Germany
Get access

Abstract

Micromachined silicon cantilever beams actuated by the converse piezoelectric effect are of great interest for actuator applications, e.g. micro relays or micro mirrors. For the miniaturization and cost saving aspects the combination of silicon bulk micromachining and chemical solution deposition (CSD) technique for the ceramic thin films is very promising.

This paper presents the results of such a fabrication process for a PbZr0.45Ti0.55O3 (PZT) thin film micro actuator for a switch application. The actuator was designed with lengths of 190-990 μm, widths of 60-120 μm, and a complete thickness of 1.5 μm. Wherein the piezoelectric PZT function layer has a thickness of 350 nm. For a distance of 10 μm between the switch contacts and an applied voltage of 10 V a finite element analysis simulation (FEA) was carried out to obtain the principal stress contribution, the optimum cantilever length, the sensitivity, the resonance frequency and the switch contact force. The bending beams were characterized by laser interferometry, resonance frequency, and force measurements. These characterization results are compared to the FEM analyses and to an analytical approach.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 688: Symposium C – Ferroelectric Thin Films X , 2001 , C5.9.1
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Stemme, E. and Stemme, G., Sens. and Act., 39, pp. 159–167 (1993).Google Scholar
[2] Itoh, T. and Suga, T., Transducers' 95, pp.632–635 (1995).Google Scholar
[3] Schroth, A. Maeda, R., Akedo, J., Ichiki, M., Jpn. J. Appl. Phys., 37, pp. 5342–5344 (1998).Google Scholar
[4] Hsueh, C.-C., Tamagawa, T., Ye, C., Helgeson, A., Polla, D. L., Int. Ferro., 3, pp. 21–32 (1993).Google Scholar
[5] Hwang, K. H., SPIE, 3513, pp. 171–180 (1998).Google Scholar
[6] Schimkat, J., PhD Thesis, TU Berlin (1996).Google Scholar
[7] Hoffmann, M., Küppers, H., Schneller, T., Böttger, U., Schnakenberg, U., Mokwa, W., and Waser, R., IEEE Applications of Ferroelectrics, 1, pp. 519–524 (2000).Google Scholar
[8] Küppers, H., Hoffmann, M., Leuerer, T., Schneller, T., Böttger, U., Waser, R., Mokwa, W., and Schnakenberg, U., Transducers'01, 2, pp. 1018–1021 (2001).Google Scholar
[9] Küppers, H., Hoffmann, M., Leuerer, T., Schneller, T., Böttger, U., Waser, R., Mokwa, W., and Schnakenberg, U., Int. Ferro., 35, no.1-4, pp.269–81 (2001).Google Scholar
[10] Prume, K., PhD Thesis, RWTH Aachen (2001).Google Scholar
[11] Hoffmann, M., Kügeler, C., Böttger, U., and Waser, R., submitted for publication to MRS Proc. (Fall 2001).Google Scholar
[12] Smits, J. G., Choi, W.-S., IEEE Trans. Ultra. Ferro. and Freq. Cont., 38, pp. 256–270, (1991).Google Scholar
[13] Schroth, A., PhD Thesis, TU Dresden (1996).Google Scholar
[14] Jaffe, B., Cook, W. R. Jr., Jaffe, H., Piezoelectric Ceramics, New York, Academic Press, (1971).Google Scholar
[15] Ren, M. Hua, PhD Thesis, TU Mainz (1996).Google Scholar
[16] Lee, C., Rev. Sci. Instrum., 68, pp. 2091–2100 (1997).Google Scholar
[17] Dubois, M. A., Muralt, P., Taylor, D. V., Hiboux, S., Int. Ferro., 22, pp. 535–543 (1998).Google Scholar
[18] Muralt, P., Int. Ferro., 17, pp. 297–307 (1997).Google Scholar
[19] Park, J. H., Xu, F., Troiler-McKinstry, S., J. Appl. Phys., 89, pp. 568–574 (2001).Google Scholar