Hostname: page-component-cd9895bd7-hc48f Total loading time: 0 Render date: 2024-12-27T01:57:07.209Z Has data issue: false hasContentIssue false

Experimental Limits of Light Capture in Thin Film Silicon Devices

Published online by Cambridge University Press:  01 February 2011

Ales Poruba
Affiliation:
[email protected], Institute of Physics, ASCR, Department of Optical Crystals, Cukrovarnicka 10, Prague, 162 53, Czech Republic, +420220318540, +420233343184
Petr Klapetek
Affiliation:
[email protected], Czech Metrology Institute, Okruzni 31, Brno, 638 00, Czech Republic
Jakub Holovsky
Affiliation:
[email protected], Institute of Physics, Academy of Sciences of the Czech Republic, Department of optical crystals, Cukrovarnicka 10, Prague, 162 53, Czech Republic
Adam Purkrt
Affiliation:
[email protected], Institute of Physics, Academy of Sciences of the Czech Republic, Department of optical crystals, Cukrovarnicka 10, Prague, 162 53, Czech Republic
Milan Vanecek
Affiliation:
[email protected], Institute of Physics, Academy of Sciences of the Czech Republic, Department of optical crystals, Cukrovarnicka 10, Prague, 162 53, Czech Republic
Get access

Abstract

New approach for the determination of the angular distribution of the scattered light at nano-rough surfaces/interfaces from AFM (Atomic Force Microscopy) data is presented. Calculation comes from modeling the electromagnetic field in the tight vicinity of the nano-rough surface by complex solution of Maxwell's equations and subsequent near field to far field transform. This method is demonstrated for four types of transparent conductive oxides (with rough free surfaces) deposited on glass substrates. As a result we have the amount and angular distribution of the scattered light „observed” in both transmission and reflection. Moreover calculation can be done for real sample dimensions (to compare the results with the measurement of the angular distribution function using LED laser) or for a semi-infinite sample which suppresses the interference effects and thus such distribution functions can be used as an input parameter for our 3-dimensional optical model CELL for thin film silicon solar cell modeling.

In the second part of this contribution we describe our experiment of thin film silicon solar cell characterization by Light Beam Induced Current (LBIC). This measurement done for laboratory solar cell structures reveals the light scattering and light trapping properties of the multilayer stack on a glass substrate. We suggest the test structure for the direct back reflector quality comparison and thus also for its optimization.

Type
Research Article
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Springer, J. Poruba, A. and Vanecek, M. J. Appl. Phys. 96 (2004), pp. 53295337 10.1063/1.1784555Google Scholar
2 Poruba, A. Vanecek, M. Meier, J. Shah, A. Journal of Non-Crystalline Solids 299-302 (2002) 536540 Google Scholar
3 Faÿ, S., Kroll, U. Bucher, C. Vallat-Sauvain, E., Shah, A. Solar Energy Materials & Solar Cells, Vol 86, pp. 385397, 2005 Google Scholar
4 Muller, J. Schope, G. Kluth, O. Rech, B. Sittinger, V. Szyszka, B. Geyer, R. Lechner, P. Schade, H., Ruske, M. Dittmar, G. Bochem, H.-P., Thin Solid Films 442 (2003) 158162 Google Scholar
5 Taflove, A. Hagness, S.C. Computational Electrodynamics: The Finite-Difference Time-Domain Method, second ed., Artech House, Norwood, MA, 2000.Google Scholar
6 Ramahi, O.M. IEEE Trans. Anten. Propagat. 45 (1997) 12631271.Google Scholar
7 Cabarrocas, P. Roca i, in: Schropp, R. Branz, H.M. Hack, M. Shimizu, I. Wagner, S. (Eds.), Amorphous and Microcrystalline Silicon Technology, MRS Symp. Proc. Series, vol. 507, 1998, p. 855.Google Scholar