Hostname: page-component-cd9895bd7-fscjk Total loading time: 0 Render date: 2024-12-27T02:37:10.525Z Has data issue: false hasContentIssue false
  • English
  • Français

Energy Release Characteristics of Impact-Initiated Energetic Materials

Published online by Cambridge University Press:  26 February 2011

Richard Ames
Richard Ames*
Affiliation:
[email protected], Naval Surface Warfare Center, Dahlgren Division, G22, Code G22 Building 221, 17320 Dahlgren Rd, Dahlgren, VA, 22448, United States
Get access

Abstract

Impact-initiated energetic materials are a class of energetic materials that are formulated to release energy under highly dynamic loads. Under quasi-static or static loads, however, the materials are intended to be inert and carry a material classification of 4.1 flammable solid. In general, these materials are formed by introducing metal powders into a polymer binder but a number of binderless varieties exist (primarily pressed/sintered intermetallics and thermites). Most of the materials are sufficiently insensitive so as not to produce a self-sustaining reaction; as such, they require the mechanical work of a high-strain-rate plastic deformation process to provide the energy required to drive the reaction. Traditional initiation techniques such as exploding bridge wires or flame initiation are not sufficient to maintain a reaction in this class of materials. This paper presents a brief overview of the energy release characteristics of this class of materials, including a discussion of the material formulations, initiation phenomena, and a discussion of the manner in which the material properties affect the energy release characteristics.

Keywords

energetic materialreactivitypolymer
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 896: Symposium H – Multifunctional Energetic Materials , 2005 , 0896-H03-08
Copyright
Copyright © Materials Research Society 2006

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. “Shear-Driven Reactive Material Combustion at High-Speed Impact”, Myriski, B., 2005 Joint Classified Warheads and Ballistics Symposium, 15–18 August, 2005Google Scholar
2. “Impact Initiation of Rods of Pressed Polytetrafluoroethylene (PTFE) and Aluminum Powders”, Mock, W. Jr, Holt, W. H., 14th APS Topical Conference on Shock Compression of Condensed Matter, 31 July – 5 August, 2005, Baltimore, MDGoogle Scholar
3. “Reaction Efficiencies for Impact-Initiated Energetic Materials”, Ames, R.G., Waggener, S.S., 32nd International Pyrotechnics Seminar, June 2005, Karlsruhe, Germany Google Scholar
4. “Vented Chamber Calorimetry for Impact-Initiated Energetic Materials”, Ames, R.G., AIAA Aerospace Sciences Meeting, January 2005 Google Scholar
5. “Measurements of Energy Release of Impacting Reactive Spheres”; Waggener, S.S.; Warheads and Ballistics Classified Symposium, August 2004 Google Scholar
6. “Energy Release of Impacting Reactive Spheres”; Waggener, S.S., Naval Surface Warfare Center; Dahlgren Division Technical Report TR-04/9; September, 2004 Google Scholar
7. “Third Reactive Fragment Target Chamber Test Series”, Brown, L., Applied Research Associates Project Number 4592 and 4593, October 1998 Google Scholar
8. “Comparison of Reactive Material Formulations, Part One: Results from Testing Activities”, Ames, R.G., Lacy, E.W., Warheads and Ballistics Classified Symposium, August 2004 Google Scholar
9. “Measurements of the Effects of Target Skin Thickness on the Impact-Initiated Energy Release from PTFE-Al Projectiles”, Ames, R.G., Brennan, B.P., Warheads and Ballistics Classified Symposium, June 2003 Google Scholar
10. “Measurements of the Effects of Impact-Initiated Energy Release from Moderate-Density Reactive Materials”, Ames, R.G., Garrett, R.K., Warheads and Ballistics Classified Symposium, June 2003 Google Scholar
11. “Detonation-Like Energy Release from High-Speed Impacts of Polytetrafluoroethylene-Aluminum Projectiles”, Ames, R.G., Garrett, R.K., Brown, L., 5th Joint Classified Bombs/Warheads and Ballistics Symposium, June 2002 Google Scholar
12. “Fracture Toughness Evaluation of Polytetrafluoroethylene”, Joyce, J.A.; 14th US National Congress on Theoretical and Applied Mechanics, June 23–28, 2002 Google Scholar