Hostname: page-component-78c5997874-m6dg7 Total loading time: 0 Render date: 2024-11-06T10:01:19.420Z Has data issue: false hasContentIssue false

Energy Harvesting From PZT Nanofibers

Published online by Cambridge University Press:  01 February 2011

Yong Shi
Affiliation:
[email protected], Stevens Institute of Technology, Mechanical Engineering, Castle Point on the Hudson, Hoboken, NJ, 07030, United States, 2012165594
Yong Shi
Affiliation:
[email protected], Stevens Institute of Technology, Mechanical Engineering, Castle Point on the Hudson, Hoboken, NJ, 07030, United States
Get access

Abstract

In this paper, we demonstrated that Lead Zirconate Titanate (PZT) nanofibers can be used to harvest energy from dynamic loading and mechanical vibration. PZT nanofibers were fabricated by electrospinning process. SEM image of PZT nanofibers has shown that the average diameter of these fibers is about 150nm, which can be tuned from 50nm to 200 nm by varying the composition and viscosity of the precursor for electrospining. Titanium substrate with ZrO2 layer was used to collect the PZT nanofibers for the demonstration of energy harvesting from dynamic loading. The largest output voltage is 170mV under 0.5% strain; the frequency of the output voltage is the same as that of the input loading. Silicon substrate with trenches was used to collect the nanofibers for energy harvesting from vibration. The output voltage generated from 150Hz sinusoid vibration source has peak voltages of 64.9mV and -95.9mV. These experimental results suggest that PZT nanofibers have great potentials for energy harvesting from environments and being used as nanogenerators. Further study is under the way to optimize the design and improve the efficiency.

Type
Research Article
Copyright
Copyright © Materials Research Society 2008

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

[1] Wang, Zhong Lin and Song, Jinhui 2006 Science 312 242 Google Scholar
[2] Song, Jinhui, Zhou, Jun and Wang, Zhong Lin, 2006, Nano Letters 6 1656 Google Scholar
[3] Wang, Xudong, Song, Jinhui, Liu, Jin and Wang, Zhong Lin 2007 Science 316 102 Google Scholar
[4] Gao, Pu Xian, Song, Jinhui, Liu, Jin and Wang, Zhong Lin 2007 Advanced Materials 19 67 Google Scholar
[5] Wang, D.-A., Cheng, C.-H., Hsieh, Y.-H. and Zhang, Z.-X. 2007 Sensors and Actuators A 137 330 Google Scholar
[6] Ko, Fu-Hsiang, Hsu, Yi-Chieh, Wang, Menq-Te and Huang, Gue-wha Steven 2007 Microelectronic Engineering 84 1300 Google Scholar
[7] Deshpande, Mandar and Saggere, Laxman 2007, Sensors and Actuators A 135 690 Google Scholar
[8] Mohammadi, Farhad, Khan, Ajmal and Cass, Richard B. 2003, Mat. Res. Soc. Symp. Proc. 736 D.5.5.1 Google Scholar
[9] Xu, Gang, Ren, Zhaohui, Du, Piyi, Wen, Wenjian, Shen, Ge and Han, Gaorong 2005 Advanced Materials 17(7) 907 Google Scholar
[10] Cao, Guozhong 2004 J. Phys. B 108 19921 Google Scholar
[11] Zhang, X. Y., Zhao, X., Lai, C. W., Wang, J., Tang, X. G. and Dai, J. Y. 2004, 85, 4190 Google Scholar
[12] Xu, Shiyou, Shi, Yong and Kim, Sang-Gook 2006 Nanotechnology 17 4497 Google Scholar
[13] IRE Standards on Piezoelectric Crystals: Measurements of Piezoelectric Ceramics, 1961 Proceedings of the IRE 1161Google Scholar