Hostname: page-component-586b7cd67f-l7hp2 Total loading time: 0 Render date: 2024-11-29T07:43:40.689Z Has data issue: false hasContentIssue false
  • English
  • Français

Electromigration Study of Ai/Low K Dielectric Line Structures

Published online by Cambridge University Press:  10 February 2011

P.-H. Wang ,
J. G. Pellerin ,
R. J. Fox III  and
P. S. Ho
P.-H. Wang
Affiliation:
Center for Materials Science and Engineering, University of Texas, Austin, TX 78712
J. G. Pellerin
Affiliation:
SEMATECH, 2706 Montopolis Drive, Austin, TX 78741
R. J. Fox III
Affiliation:
SEMATECH, 2706 Montopolis Drive, Austin, TX 78741
P. S. Ho
Affiliation:
Center for Materials Science and Engineering, University of Texas, Austin, TX 78712
Get access

Abstract

Electromigration reliability is a key concern for implementation of low dielectric constant (k) materials for on-chip interconnects. To address this problem, we have carried out a comparative study of electromigration performance for Al(0.5 wt% Cu) line structures formed with TEOS-based SiO2 and a low k polymeric material, poly(arylene ether) (PAE). The test structures consist of 800 μm long single-level ines. Resistometric measurements were performed to determine electromigration lifetime. To supplement lifetime measurements, TEM was used to measure overall grain size and electron back-scatter diffraction (EBSD) was employed to determine the local grain orientation and grain boundary characteristics in the line structure. In addition, SEM was used to examine void morphology. Microstructural analysis revealed a larger grain size and an enhanced (111) texture in PAE-passivated lines compared to TEOS-passivated lines. The differences can be attributed to a high-emperature process used to cure the PAE dielectric. The overall results obtained in this study show reasonably good electromigration performance for low k dielectric interconnects.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 511: Symposium E – Low Dielectric Constant Materials IV , 1998 , 353
Copyright
Copyright © Materials Research Society 1998

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Jeng, S.-P., Taylor, K., Chang, M.-C., Ting, L., Lee, C., McAnally, P., Seha, T., Numata, K., Tanaka, T., and Havemann, R. H., Mater. Res. Soc. Symp. Proc. 381, 197 (1995).Google Scholar
2. Wetzel, J. T., Lii, Y. T., Filipiak, S. M., Nquyen, B.-Y., Travis, E. O., Fiordalice, R. W., Winkler, M. E., Lee, C. C., and Peschke, J., Mater. Res. Soc. Symp. Proc. 381, 217 (1995).Google Scholar
3. Dingley, D. J. and Randel, V., Journal of Materials Science 22, 4545 (1992); V. Randle, The Measurement of Grain Boundary Geometry (Institute of Physics Publishing, London, London, UK, 1993).Google Scholar
4. Wang, P. H., Ho, P. S., Pellerin, J. and Fox, R., to be published.Google Scholar
5. Jin, C. et al. , VMIC Conference Proc., Santa Clara, CA, 1996, p. 220.Google Scholar