Hostname: page-component-78c5997874-ndw9j Total loading time: 0 Render date: 2024-11-17T20:13:25.312Z Has data issue: false hasContentIssue false

Electrochemical Measurements during the Anaerobic Corrosion of Steel

Published online by Cambridge University Press:  21 March 2011

N.R. Smart
Affiliation:
AEA Technology plc, Culham Science Centre, Abingdon, Oxfordshire, OX14 3ED, United Kingdom. Email: [email protected]
P.A.H. Fennell
Affiliation:
AEA Technology plc, Culham Science Centre, Abingdon, Oxfordshire, OX14 3ED, United Kingdom. Email: [email protected]
R. Peat
Affiliation:
AEA Technology plc, Culham Science Centre, Abingdon, Oxfordshire, OX14 3ED, United Kingdom
K. Spahiu
Affiliation:
SKB, Box 5864, SE-10240, Stockholm, Sweden
L. Werme
Affiliation:
SKB, Box 5864, SE-10240, Stockholm, Sweden
Get access

Abstract

In Sweden, it is proposed that spent fuel should be encapsulated in sealed cylindrical canisters for disposal in a geologic repository. The canisters would consist of a thick ferrous inner container and a copper overpack. If mechanical failure of the copper overpack occurred, allowing water to enter, the ferrous inner container would corrode anaerobically and liberate hydrogen. The rate of hydrogen generation due to the anaerobic corrosion of steel in anoxic groundwater has been measured using barometric cells. The aim of the work presented in this paper was to measure the redox potential, Eh and pH in the presence of anaerobically corroding steel, in a barometric cell. Two specially designed barometric cells were constructed. They were equipped with a silver chloride or calomel reference electrode, a gold Eh electrode, a glass electrode, and a steel electrode. The electrodes were allowed to stabilize in anoxic artificial groundwater and then a mass of pickled steel wire was introduced into the test cell. As the wires were added, the redox potential rapidly became more negative due to the rapid consumption of the residual oxygen. The corrosion potential of the steel was stable and a slow drift in pH was observed. The results are compared with the results of geochemical modelling. Extension of the work to investigate the electrochemical parameters in the presence of dissolved uranium species is discussed.

Type
Research Article
Copyright
Copyright © Materials Research Society 2001

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Smellie, J.A.T., Laaksoharju, M. and Wikberg, P., J. Hydrol. 172, 147, (1995).Google Scholar
2. Smart, N.R., Blackwood, D.J. and Werme, L., submitted to Corrosion (2000).Google Scholar
3. Gran, G., International Congress on Analytical Chemistry 77, 661, 1952.Google Scholar
4. Dobos, D., Electrochemical Data, (Elsevier, 1975) p. 208.Google Scholar
5. Ives, D.J.G. and Janz, G.J. (eds), Reference Electrodes. Theory and Practice, (Academic Press, 1961) p. 189.Google Scholar